Barrel Heaters - Hasmak.com.tr

<strong>Heaters</strong>The RAYMAX FamilyTemperature ControlThermowells31 mm (1.25 in.)A thermowell allows you to use athermocouple with a bayonet fittingto monitor heater temperature. Thethermowell is located on the back ofthe panel to allow easy access forthermocouple replacement. Springtension holds the tip of thethermocouple in contact for closecontrol of the heater temperature.Thermocouple not included.Available with RAYMAX 1010,1120 and 1330.Thermocouple ClampsA thermocouple mounting clamp canbe provided on the end of the heatercase. The clamp is suitable for usewith 3.175 mm (0.125 in.) and 6.35mm (0.25 in.) O.D. sheaththermocouples, which should bebent 90 degrees so that the sensingtip is just above and lightly touchingthe hot face at an element location.Available with RAYMAX 1220and 2030.Welded ThermocoupleA thermocouple junction is welded tothe emitting surface to provideoptimum temperature sensingaccuracy and responsiveness. Thisoption permits the actual radiatingface temperature to be preciselymonitored and controlled.Available with RAYMAX 1010, 1120and 1330.Thermocouple PocketA thermocouple pocket is welded tothe emitting surface. The pocketaccepts a 1.6 mm (0.063 in.)diameter thermocouple (notincluded). This option providesaccurate temperature sensing andeasy thermocouple replacement.Available with RAYMAX 1010, 1120and 1330.294