Barrel Heaters - Hasmak.com.tr

W A T L O W<strong>Barrel</strong> <strong>Heaters</strong>THINBAND Mica<strong>Barrel</strong> Heater VariationsContinued35 mm(1.375 in.)Stock LA OptionStock Option45 mm(1.75 in.)Non-Stock OptionStock Option48 mm(1.875 in.)73 mm(2.875 in.)60 mm(2.375 in.)Two-Piece <strong>Barrel</strong> <strong>Heaters</strong>Two-piece construction is availableon heaters 127 mm (5 in.) or greaterin diameter. <strong>Heaters</strong> 38 mm (1.5 in.)wide and greater with post terminalshave the two terminals side-by-side.Note: When ordering two-piecebarrel heaters, specify the volts andwatts per half. On two-piece unitswith leads, you must also specify thepower supply voltage. Example:a two-piece barrel that is 240VÅ(ac)per half may be wired in series to aHigh Temperature “Quick Disconnect” European Style PlugsThey provide the simplest and safestway to apply power to barrelheaters.The <strong>com</strong>bination of hightemperature male and female quickdisconnect plug assemblieseliminates all live exposed terminalsand electrical wiring that can be a480VÅ(ac) power supply. In thiscase the barrel heater lead wireinsulation must be rated for480VÅ(ac). Available from stock by<strong>com</strong>bining two one-piece heaters tocreate a large diameter. Terminationswill be 90 degrees from each gap.QUICK CLAMP must be supplied atone gap when ordering.potential hazard to employees ormachine. Maximum 15 amps at240VÅ(ac), maximum volts 240.When ordering, specify vertical orhorizontal European Plug.Injection Molding<strong>Barrel</strong> <strong>Heaters</strong>VerticalHorizontalStock OptionRight AngleCode # N6027AF049Stock OptionStraightCode # N6027ZZ028High Temperature “Quick Disconnect” European Style Female AdaptersAvailable as an accessory item thatmust be used in conjunction withhigh temperature “quick disconnect”European Style Plugs. Specify codenumber N6027AF049 or N6027ZZ028and quantity.See page 38 forminimum/maximumdimensional requirements.41