Barrel Heaters - Hasmak.com.tr

TemperatureControllersSERIES F4SSet Point Ramp and SoakProgrammingThe enhanced programming featuresfound in the SERIES F4S rampingcontrollers are the result of listeningto our customers’ demand for greatercapabilities with reducedprogramming <strong>com</strong>plexity.A profile guide leads the programmerthrough the programming process byoffering choices for stepconfiguration. For better operatorrecognition, profiles and digital I/Oused for events can be given namesof up to 10 characters in length.Five step types including ramp, soak,jump, auto start and end offer theprogrammer <strong>com</strong>plete flexibility.Ramp steps can be based on time orrate. Ramp and soak steps can beprogrammed to wait for up to fourevent inputs and three processvariables. Up to eight event outputsare step selectable. Since yourthermal systems characteristics maychange over the operating range,up to 10 sets of PID heat/coolparameters are step selectable.The auto start step can start a profilebased on a set date, a day of theweek or daily, the choice is yours.The jump step can be used to jumpwithin a profile or to another profile.The end step terminates a programwith the control outputs programmedto your process needs.Temperature Chamber Application with CascadeInput 1(Inner Loop)Input 3(Outer Loop)Outer Loop Temperature SensorInner Loop Temperature SensorSerial CommunicationEIA/232 and EIA/485 serial<strong>com</strong>munication interfaces areincluded in the base unit of boththe SERIES F4S (single channel)and the SERIES F4D (dual channel)controllers. The baud rate isselectable as either 9600 or 19200baud. The protocol is Modbus.AlarmsTwo Form “C” electromechanicalalarm relays are included in thebase units. These alarms can beprogrammed as either process ordeviation alarms. The alarms can betied to up to three process variables.Panel Cutout92 mm x 92 mm(3.622 in. x 3.622 in.)99.82 mm(3.930 in.)99.82 mm(3.930 in.)Optional Retransmit(s)Optional retransmit capability isavailable to retransmit one or two108.81 mm(4.824 in.)108.05 mm(4.254 in.)97.79 mm(3.850 in.)10.26 mm(0.404 in.)variables. These variables include upto three process variables, controlset points or percent load power.266