Barrel Heaters - Hasmak.com.tr

W A T L O WHot RunnerNozzle <strong>Heaters</strong>FIREROD CartridgeLA StockLA Build-a-Code NumberStock Code NumberSee ListLength Adder CodeSee BelowOption CodeSee BelowLead Length a-Example:Code NumberLength Adder CodeOption Code LengthOption CodeJ12A89 - N 12 W 74Lead Lengtha Lead length will be 51 mm (2 in.) longerthan braid or hose unless otherwisespecified on the order.Option Minimum Length Adders Per Diameter Per Option OptioninchesCodeHeater Diameter 1⁄43⁄8Swaged-in Leads E ( 1 ⁄4) E ( 1 ⁄4) E ( 1 ⁄4) E ( 1 ⁄4) E ( 1 ⁄4) NoneRight Angle Leads K ( 9 ⁄16) G ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) RTeflon ® Seal and Leads — — N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) TRight Angle Teflon ® Seal and Leads — — 1E (1 1 ⁄4) 1E (1 1 ⁄4) 1E (1 1 ⁄4) 1E (1 1 ⁄4) BSilicone Seal and Leads — — N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) PStraight Hose J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) HRight Angle Hose — — N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) R ( 7 ⁄8) WStraight Hose with Teflon ® Seal and Leads — — N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) GStraight Braid J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) J ( 1 ⁄2) CRight Angle Braid — — N ( 3 ⁄4) N ( 3 ⁄4) N ( 3 ⁄4) R ( 7 ⁄8) YRight Angle Braid with Teflon ® Seal and Leads — — 1E (1 1 ⁄4) 1E (1 1 ⁄4) 1E (1 1 ⁄4) 1E (1 1 ⁄4) A1⁄25⁄83⁄4Injection MoldingHot Runner Nozzle <strong>Heaters</strong>LA options are available on all stockFIRERODs, except 3 mm (0.125 in.)diameter. To order any of theseoptions, please build the ordernumber by specifying Watlow codenumber, length adder code, optioncode and lead length.How to OrderTo order Stock FIREROD cartridgeheaters, specify:• Watlow code number• Quantity• Options• Lead length: If not specified,305 mm (12 in.) crimped on leadswill be shipped.Ordering Example: The ordernumber J12A89-N72W74 indicatesyou have ordered a 305 mm (12 in.)FIREROD with 1830 mm (72 in.)right angle stainless steel hose and1880 mm (74 in.) leads. The overallheater length equals 320 mm (12.75 in.).Note: No-heat extensions areavailable for most LA options indiameters of 10 mm (0.375 in.),13 mm (0.5 in.), 16 mm (0.625 in.),and 19 mm (0.75 in.). Consultfactory for available LA options. Noheatlength extensions are availablein the following dimensions.For made-to-order FIRERODs,please specify:• Diameter• Overall length• Volts• Watts• Lead option and length orterminal configurationNo-Heat Length Adder CodesNo-HeatOptionmm (in.)LengthAdder Code10 ( 3 ⁄4) N32 (1 1 ⁄4) 1E44 (1 3 ⁄4) 1N56 (2 1 ⁄4) 2ETo order any of these dimensions,please specify the applicable lengthadder code shown. No-heatextensions on all termination optionsare shipped within two to three days.• Lead end no-heat if different fromstandard• Optional accessories, finishing,internal construction, sensors/controls and mountingAvailabilityStock: Same day shipment onmany FIREROD stock optionsMade-to-Order: Consult factory83