Smartline Autosampler 3900 Manual / Handbuch V 1508 03/2007

Quick Start AS 3900 9
Press keys: Description:
[180] [Enter]
[Enter]
[Enter]
[40] [Enter]
[Enter]
[Enter]
[3] [Enter]
[250] [Enter]
Add another 180 µl Reagent–A to the
Destination vial.
Insert the third Mix step:
Add 40 µl from the Sample vial to the
Destination vial.
Insert the fourth Mix step:
Mix the contents of the Destination vial 3
times with a volume of 250 µl
Press [Escape] three times to go back to the Ready screen
Programming the Series (See page 43 of this manual)
Press keys: Description:
[Series] [1] [Enter] Enter Series number 1.
[1] [Enter] Enter Method number:1
[1] [Enter] Enter First sample vial: 01
[1] [Enter] Enter Last sample vial: 01
[2] [Enter] Enter First destination vial: 02
Press [Escape] (twice) to go back to the Ready screen
Running the Series (See page 45 of this manual)
Put a sample vial in position 1, an empty sealed destination vial in
position 2 and a filled reagent vial in position 86. Be sure the reagent vial
is filled correctly before starting a new Series. (If you can’t reach one of
the tray positions, turn the tray manually).
Press keys: Description:
[Start/Stop]
[1] [Enter] Start at Series number:1
[1] [Enter] Stop after Series number: 1
If you press AS 3900 will start searching for vial 86 and
transport 180 µl to the destination vial twice, subsequently 40 µl of
sample will be added and after mixing 3 times a 10 µl injection will be
performed.