Smartline Autosampler 3900 Manual / Handbuch V 1508 03/2007

40 Operation
A wash comprises two parameters:
Parameter: Range:
Wash
between:
Number of
syringe
volumes:
Wash the needle and tubing directly
after every injection.
Wash the needle and tubing directly
after every vial.
Wash the needle and tubing directly
after every Series.
Remove the wash item from the
method.
0-9 Wash volume in number of syringe
volumes.
If the wash program is the only program used in a method, program
a wash between Series, otherwise the Series with this method will not
be executed!
After all parameters are programmed, return to the main screen of
method programming by pressing [Escape].
Timed events program
After pressing the AS 3900 will ask if the timed events
program must be used in this method if is pressed AS 3900
returns with the first screen of timed events programming.
If is pressed the timed events program is not used in this
method and the AS 3900 returns to the previous screen. The content
of the timed events program is NOT removed and will be available if
the next time is pressed.
METHOD NUMBER: 1 SECTION: TIMED EVENTS
1. AUX-1 ON AT TIME: 0:00:00
The timed events program is a list of 20 programmable events to control
other devices via the two auxiliaries (contact closures) or to activate a
new oven set point. Each event can be programmed on a time base,
which starts at the moment of injection.
Press [Clear] to remove the programmed time, the display will show the
value: NONE.
A complete list is shown in Table 6, to step through the list use the
[ENTER] key or one of the soft function keys to step direct to the first line
of an other section.