OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Trend Micro OfficeScan 10.6 Administrator’s Guide
4-52
5. To change the default folder for saving the CSV file:
a. Click Browse.
b. Select a target folder on the computer or on the network.
c. Click OK.
6. Click OK. The Settings screen closes.
Ping Settings
Use "ping" settings to validate the existence of a target machine and determine its
operating system. If these settings are disabled, Vulnerability Scanner scans all the IP
addresses in the specified IP address range – even those that are not used on any host
machine – thereby making the scanning attempt longer than it should be.
Perform the following steps to configure ping settings:
1. To specify ping settings from Vulnerability Scanner (TMVS.exe):
Note: Ping settings are a subset of vulnerability scan settings. For details about
vulnerability scan settings, see Running Vulnerability Scans on page 4-37.
a. Launch TMVS.exe.
b. Click Settings. The Settings screen appears.
c. Go to the Ping settings section.
d. Select Allow Vulnerability Scanner to ping computers on your network to
check their status.
e. In the Packet size and Timeout fields, accept or modify the default values.
f. Select Detect the type of operating system using ICMP OS
fingerprinting. If you select this option, Vulnerability Scanner determines if a
host machine runs Windows or another operating system. For host machines
running Windows, Vulnerability Scanner can identify the version of Windows.
g. Click OK. The Settings screen closes.