OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Client tree
settings
Scanning for Security Risks
TABLE 6-2. Considerations When Switching to Conventional Scan (Continued)
CONSIDERATION DETAILS
Scan method is a granular setting that can be set on the
root, domain, or individual client level. When switching to
conventional scan, you can:
• Create a new client tree domain and assign conventional
scan as its scan method. Any client you move to this
domain will use conventional scan. When you move the
client, enable the setting Apply settings of new domain
to selected clients.
• Select a domain and configure it to use conventional
scan. Smart scan clients belonging to the domain will
switch to conventional scan.
• Select one or several smart scan clients from a domain
and then switch them to conventional scan.
Note: Any changes to the domain’s scan method overrides
the scan method you have configured for individual
clients.
Switching from Conventional Scan to Smart Scan
If you are switching clients from conventional scan to smart scan, ensure that you have
set up Smart Protection Services. For details, see Setting Up Smart Protection Services on
page 3-13.
The following table provides other considerations when switching to smart scan:
TABLE 6-3. Considerations When Switching to Smart Scan
CONSIDERATION DETAILS
Unavailable
features and
functions
Smart scan clients cannot report Smart Scan Pattern and
Smart Scan Agent Pattern information to the Policy Server.
6-11