OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Trend Micro OfficeScan 10.6 Administrator’s Guide
9-22
7. Choose one of the following criteria and configure additional settings for the
chosen criteria:
• None
• Specific characters
• Suffix
• Single-character separator
See Customized Expressions on page 9-19 for details about the criteria and additional
settings.
8. Test the expression against an actual data. For example, if the expression is for a
national ID, type a valid ID number in the Test data text box, click Test, and then
check the result.
9. Click Save if you are satisfied with the result.
Tip: Save the settings only if the testing was successful. An expression that cannot
detect any data wastes system resources and may impact performance.
10. A message appears, reminding you to deploy the settings to clients. Click Close.
11. Back in the Digital Asset Definitions screen, click Apply to All Clients.
To add an expression using the "copy" option:
Note: Use this option if an expression you want to add has similar settings with an existing
expression.
PATH: NETWORKED COMPUTERS > DIGITAL ASSET CONTROL > DEFINITIONS
1. Click the Expressions tab.
2. Select a customized expression and then click Copy. A new screen appears.
3. Type a unique name for the expression. The name must not exceed 100 bytes in
length and cannot contain the following characters:
> < * ^ | & ? \ /
4. Accept or modify the other settings.
5. Click Save.