OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Trend Micro OfficeScan 10.6 Administrator’s Guide
Configuring Digital Asset Control Policies
9-64
You can start to create Digital Asset Control policies after you have configured digital
asset definitions and organized them in templates.
In addition to digital asset definitions and templates, you need to configure channels and
actions when creating a policy. For details about policies, see Digital Asset Control Policies
on page 9-10.
To create a Digital Asset Control policy:
PATH: NETWORKED COMPUTERS > CLIENT MANAGEMENT
1. In the client tree, click the root domain icon
specific domains or clients.
to include all clients or select
2. Click Settings > Digital Asset Control Settings.
3. Click the External Clients tab to configure a policy for external clients or the
Internal Clients tab to configure a policy for internal clients.
Tip: Configure client location settings if you have not done so. Clients will use these
settings to determine their location and apply the correct Digital Asset Control
policy. For details, see Computer Location on page 13-2.
4. Select Enable Digital Asset Control.
5. If you are on the External Clients tab, you can apply all Digital Asset Control
settings to internal clients by selecting Apply all settings to internal clients.
If you are on the Internal Clients tab, you can apply all Digital Asset Control
settings to external clients by selecting Apply all settings to external clients.
6. Configure the following settings:
• Template Settings on page 9-65
• Channel Settings on page 9-66
• Action Settings on page 9-67