OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Action Settings
Managing Data Protection and Using Digital Asset Control
1. Click the Action tab.
2. If you are on the External Clients tab, you can apply action settings to internal
clients by selecting Apply settings to internal clients.
If you are on the Internal Clients tab, you can apply action settings to external
clients by selecting Apply settings to external clients.
3. Select a primary action and any additional actions. For details about actions, see
Digital Asset Control Actions on page 9-58.
4. Configure settings for decompression rules. For details about decompression rules,
see Decompression Rules on page 9-59.
Device List Tool
Run the Device List Tool locally on each endpoint to query external devices connected
to the endpoint. The tool scans an endpoint for external devices and then displays
device information in a browser window. You can then use the information when
configuring device settings for Digital Asset Control and Device Control.
To run the Device List Tool:
1. On the OfficeScan server computer, navigate to \PCCSRV\Admin\Utility\ListDeviceInfo.
2. Copy listDeviceInfo.exe to the target endpoint.
3. On the endpoint, double-click listDeviceInfo.exe.
4. View device information in the browser window that displays. Digital Asset Control
and Device Control use the following information:
• Vendor (required)
• Model (optional)
• Serial ID (optional)
9-67