OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Trend Micro OfficeScan 10.6 Administrator’s Guide
11-20
To add a profile:
PATH: NETWORKED COMPUTERS > FIREWALL > PROFILES
1. Click Add.
2. Click Enable this profile to allow OfficeScan to deploy the profile to OfficeScan
clients.
3. Type a name to identify the profile and an optional description.
4. Select a policy for this profile.
5. Specify the client computers to which OfficeScan applies the policy. Select
computers based on the following criteria:
• IP address
• Domain: Click the button to open and select domains from the client tree.
Note: Only users with full domain permissions can select domains.
• Computer name: Click the button to open, and select client computers from,
the client tree.
• Platform
• Logon name
• NIC description: Type a full or partial description, without wildcards.
Tip: Trend Micro recommends typing the NIC card manufacturer because NIC
descriptions typically start with the manufacturer’s name. For example, if you
typed "Intel", all Intel-manufactured NICs will satisfy the criteria. If you typed a
particular NIC model, such as "Intel(R) Pro/100", only NIC descriptions that
start with "Intel(R) Pro/100" will satisfy the criteria.
• Client connection status
6. Select whether to grant users the privilege to change the firewall security level or
edit a configurable list of exceptions to allow specified types of traffic. See Adding or
Modifying a Firewall Policy on page 11-10 for more information about these options.
7. Click Save.