OfficeScan 10.6 Administrator's Guide - Trend Micro™ Online Help

Managing Data Protection and Using Digital Asset Control
3. In the Pager tab:
a. Go to the Digital Asset Transmissions section.
b. Select Enable notification via pager.
c. Type the message.
4. In the SNMP Trap tab:
a. Go to the Digital Asset Transmissions section.
b. Select Enable notification via SNMP trap.
c. Accept or modify the default message. You can use token variables to
represent data in the Message field. See Token Variables for Digital Asset Control
Notifications on page 9-70 for details.
5. In the NT Event Log tab:
a. Go to the Digital Asset Transmissions section.
b. Select Enable notification via NT Event Log.
c. Accept or modify the default message. You can use token variables to
represent data in the Message field. See Token Variables for Digital Asset Control
Notifications on page 9-70 for details.
6. Click Save.
Digital Asset Control Notifications for Client Users
OfficeScan can display notification messages on client computers immediately after it
allows or blocks the transmission of digital assets.
To notify users that digital asset transmission was blocked or allowed, select the option
Notify the client user when you create a Digital Asset Control policy. For instructions
on creating a policy, see Configuring Digital Asset Control Policies on page 9-64.
To configure Digital Asset Control notifications for client users:
PATH: NOTIFICATIONS > CLIENT USER NOTIFICATIONS
1. Click the Digital Asset Transmissions tab.
2. Accept or modify the default message.
3. Click Save.
9-71