Digital Mailing System DM400,TM DM500TM and DM550TM

5 • Mailing System Setup
3
5-6
Setting the
Date and
Time of Day
If your mail is picked up at a certain
time each day, you can set your system
to advance the date at the mail pickup
time.
NOTE: The date on the digital indicia
should correspond to the date when your
mail goes to the post office.
If you enter an invalid time or date, the
system beeps and the screen displays
the message: “Invalid Time”.
To adjust the time and enter date advance:
1. Press the Menu key.
2. Select Set Up.
3. Select Time of Day.
4. You can select:
Current Time
Date will advance after
Daylight Saving
5. For Current Time or Date will advance
after, enter the correct time
and date. Use the right arrow key to
toggle between AM and PM. You do
not need to enter the colon (:) between
hours and minutes.
Press Enter to accept the time. To
return to the main screen, press the
left arrow key.
6. To turn the Daylight Saving mode
on or off, use the right arrow key.
To exit the Daylight Saving mode,
press the left arrow key.
Set Up
Basic Settings
Presets
Account Set Up
Display Language
Phone Set Up
Time of Day
Updates and Add-Ons
Scales/Rates
Take Meter Out of Service
Note: Services/Features may
vary by model, country and or enabled
features.
SV61964 Rev. A