Digital Mailing System DM400,TM DM500TM and DM550TM

5 • Mailing System Setup
9
5-18
Configuring
High/Low
Funds
Warnings
Setting the Low Funds Warning
Value
Use this option to set a value at which
the mailing system warns you that the
funds remaining in the IntelliLink
Control Centre are getting low.
1. Press the Menu key on the control
centre, select Set Up from the main
screen, and then select Basic
Settings.
2. Select Low Funds Warning.
3. Enter the low value warning
amount using the numeric keyboard.
4. Press the Enter key.
Setting the High Value Warning
BASIC SETTINGS
Low Funds Warning
High Value Warning
Lock Code
Supervisor Set Up
Timeouts
First Low Ink Warning
Second Low Ink Warning
Note: Services/Features may
vary by model, country and or enabled
features.
NOTE: The internal rating feature ensures that mail pieces are rated accurately
and therefore the high value warning will not be triggered for any set high value.
This is specific to the Canadian market only.
Use this option to set a value at which the mailing system warns you that
you have entered a postage value that is more than the amount you are
setting here. This feature prevents you from accidentally printing a postage
amount that is more than you need.
1. Select High Value Warning.
2. Enter the high value warning amount ($0–$99.99) using the
numeric keypad.
3. Press the Enter key.
IMPORTANT: Because of changes in the software this feature is no longer
operational, even if a value is shown on the screen. Postage values are now
derived from the internal rating feature. Consequently, the high value warning
prompt will not be triggered even if a specific dollar value has been setup with
this feature.
SV61964 Rev. A