Digital Mailing System DM400,TM DM500TM and DM550TM

10
Configuring System
Timeouts This section describes how to set various
system timeouts for your mailing
system.
1. To access the system timeouts,
press the Menu key on the control
centre, and select Set Up.
2. Select Basic Settings and then
Timeouts to get all of the timeout
options.
The timeout options are:
Timeouts:
Display Sleep
Display Sleep
System Sleep
Normal Preset Timeout
Feeding Timeout
Waiting for Env
Transaction Timeout
This option allows you to specify how
long the system can remain inactive
before the display turns off. You can set
the timeout for 1–30 minutes, in 1 minute
increments. The default timeout is 5
minutes.
The display turns on again when you
press any key on the control centre or
if you place mail in the feeder or on the
scale (either integrated or attached external
scale).
1. Press the Menu key and select Set
Up.
2. Select Basic Settings and then
Timeouts.
3. Select Display Sleep.
4. Enter the number of minutes (1–30)
using the numeric keyboard.
5. Press the Enter key.
DM400, DM500, DM550 Operating Guide
All of these options are described in
the following sections.
BASIC SETTINGS
Low Funds Warning
High Value Warning
Lock Code
Supervisor Set Up
Timeouts
First Low Ink Warning
Second Low Ink Warning
Note: Services/Features may
vary by model, country and or enabled
features.
TIMEOUTS
Display Sleep
Normal Preset Timeout
Feeding Timeout
Waiting for Env
Transaction Timeout
Note: Services/Features may
vary by model, country and or enabled
features.
SV61964 Rev. A 5-19