Digital Mailing System DM400,TM DM500TM and DM550TM

5 • Mailing System Setup
4 Setting Up a To password protect an operation:
BASIC SETTINGS
Supervisor 1. Press the Menu key.
Low Funds Warning
Password 2. Select Set Up, then select Basic High Value Warning
continued Settings.
Lock Code
5-8
3. Press the down arrow and select
Supervisor Set Up.
4. Select the option that corresponds
to the operation you want to password
protect. The options are:
a.) Refill - select this to require a
password for adding postage.
b.) Clear Batch - select this to
require a password before you
can clear the batch count information
from the system. The
batch count corresponds to the
number of pieces of mail processed
by the system.
c.) Scale/Rates - select this to
require a password before you
can modify any of the Scale/
Rates features.
See Section 6 below.
d.) Accounting - select this to
require a password to set up
accounts. If you plan to assign
passwords to your accounts
(see Chapter 7 in this guide),
you must set up a supervisor
password here.
Supervisor Set Up
Timeouts
First Low Ink Warning
Second Low Ink Warning
Note: Services/Features may
vary by model, country and or enabled
features.
SV61964 Rev. A