Digital Mailing System DM400,TM DM500TM and DM550TM

Scale/Rates:
Clear zone if new
class
Scale/Rates:
Code/Zone prompt
Scale/Rates:
Discount Code
DM400, DM500, DM550 Operating Guide
If you enable this option then the current code or zone information is
cleared if you select a new class.
1. Press the Menu key on the control centre and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Clear Zone/New Class.
3. To enable this feature, toggle between On and Off.
If the class and weight of your mail requires you to provide a destination or
Code/Zone, select this option to enter a Code/Zone.
1. Press the Menu key on the control centre and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Code/Zone prompt.
3. If you prefer to enter Codes all the time when you are running mail,
select Code.
If you prefer to enter Zones all the time when you are running mail,
select Zone.
4. If you use both Codes and Zones when running mail, select Prompt.
This option allows you to access discounted rates if available through the
post office/carriers.
1. Press the Menu key on the control centre and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Discount Code.
3. Select Create new to create a new discount code,
Select one of the displayed carrier names to edit an existing discount
code.
4. Define or edit the carrier, class, sub and subsubclass, and whether you
are applying a discount or surcharge at a percentage or flat rate.
5. Follow the system prompts.
SV61964 Rev. A 5-13