Digital Mailing System DM400,TM DM500TM and DM550TM

Scale/Rates:
Attached Scale
Scale/Rates:
AutoScale
DM400, DM500, DM550 Operating Guide
This option appears only if you have an integrated scale or an attached
external scale connected to your mailing system.
Use this option to select how much time your system allows the scale to
settle (Normal or Adjust for Motion).
Select Adjust for motion if your mailing system is in an environment subject
to vibrations, such as near air-conditioning vents or closing doors. If you
select this, the scale will require more time to settle.
1. Press the Menu key on the control centre and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Select Attached Scale. The “Vibration Setting” screen displays.
3. Press the screen key for the Attached Scale selection in this screen to
toggle between Normal and Adjust for Motion.
4. Press the Enter key to accept.
You can set AutoScale to On or Off.
Select On to enable the AutoScale feature.
Select Off to disable this feature.
If you disable this feature and your system has an attached scale, you
need to select the Attached Scale mode when running mail if you want
your system to weight the mail and calculate postage. Refer to the Selecting
the Postage Mode section in Chapter 4 in this guide.
1. Press the Menu key on the control centre and select Set Up. Press the
down arrow key and select Scale/Rates.
2. Press the screen key for the AutoScale selection to toggle between On
and Off.
3. Press Clear or press the left arrow to exit.
SV61964 Rev. A 5-11