FTOS Command Reference for the S-Series - Force10 Networks

clock timezone
Defaults Not configured.
Command Modes CONFIGURATION
Command
History
clock timezone
c e s Configure a timezone for the switch.
Syntax clock timezone timezone-name offset
Parameters
start-month Enter the name of one of the 12 months in English.
start-time Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour
format, example, 17:15:00 is 5:15 pm.
end-week (OPTIONAL) Enter the one of the following as the week that daylight savings
ends:
• week-number: enter a number from 1-4 as the number of the week to end
daylight savings time.
• first: enter the keyword first to end daylight savings time in the first week of
the month.
• last: enter the keyword last to end daylight savings time in the last week of the
month.
end-day Enter the weekday name that you want daylight saving time to end. Enter the
weekdays using the three letter abbreviations, for example Sun, Sat, Mon etc.
Range: Sun to Sat
end-month Enter the name of one of the 12 months in English.
end-time Enter the time in hours:minutes:seconds. For the hour variable, use the 24-hour
format, example, 17:15:00 is 5:15 pm.
offset (OPTIONAL) Enter the number of minutes to add during the summer-time period.
Range: 1 to 1440.
Default: 60 minutes.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
Version 7.4.1.0 Updated the start-day and end-day options to allow for using the
three-letter abbreviation of the weekday name.
pre-Version 6.1.1.0 Introduced for E-Series
To delete a timezone configuration, enter no clock timezone.
timezone-name Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to UTC for the
timezone.
• a minus sign (-) followed by a number from 1 to 23 as the number of hours
154 Time Commands