FTOS Command Reference for the S-Series - Force10 Networks

show system (S-Series)
Defaults None
Command Mode EXEC
Command
History
Example
EXEC privilege
Figure 35 show software ifm clients summary Command Output
show system (S-Series)
s View the current switch status.
Syntax show system [brief | stack-unit unit-id]
Parameters
Command Modes EXEC
stack-unit
unit-ID
EXEC privilege
Enter the keyword stack-unit followed by the stack member number to display
IFM information for that unit.
Range: 0-1
trace-flags Enter the keyword trace-flags to display IFM information for internal
trace flags.
Version 7.6.1.0 Introduced for S-Series
Force10#show software ifm clients summary
ClntType Inst svcMask subSvcMask tlvSvcMask tlvSubSvc swp
IPM 0 0x00000000 0x00000000 0x90ff71f3 0x021e0e81 31
RTM 0 0x00000000 0x00000000 0x800010ff 0x01930000 43
VRRP 0 0x00000000 0x00000000 0x803330f3 0x00400000 39
L2PM 0 0x00000000 0x00000000 0x87ff79ff 0x0e032200 45
ACL 0 0x00000000 0x00000000 0x867f50c3 0x000f0218 44
OSPF 0 0x00000dfa 0x00400098 0x00000000 0x00000000 0
PIM 0 0x000000f3 0x00030000 0x00000000 0x00000000 0
IGMP 0 0x000e027f 0x00000000 0x00000000 0x00000000 0
SNMP 0 0x00000000 0x00000000 0x800302c0 0x00000002 30
EVTTERM 0 0x00000000 0x00000000 0x800002c0 0x00000000 29
MRTM 0 0x00000000 0x00000200 0x81f7103f 0x00000000 38
DSM 0 0x00000000 0x00000000 0x80771003 0x00000000 32
LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000 0x00000000 0
Force10#
brief (OPTIONAL) Enter the keyword brief to view an abbreviated list of
system information.
stack-unit unit-id (OPTIONAL) Enter the keyword stack-unit followed by the stack
member ID for information on that stack member. Range: 0 to 1.
96 Control and Monitoring Commands