FTOS Command Reference for the S-Series - Force10 Networks

Related
Commands
show ip ospf database network
c e s Display the network (type 2) LSA information.
show ip ospf database network
Syntax show ip ospf database network [link-state-id] [adv-router ip-address]
Parameters
Command Modes EXEC
Command
History
Table 46 show ip ospf database external Command Example Fields (continued)
Item Description
LS Seq Number Identifies the link state sequence number. This number enables you to
identify old or duplicate LSAs.
Checksum Displays the Fletcher checksum of an LSA’s complete contents.
Length Displays the length in bytes of the LSA.
Network Mask Displays the network mask implemented on the area.
Metrics Type Displays the external type.
TOS Displays the TOS options. Option 0 is the only option.
Metrics Displays the LSA metric.
Forward Address Identifies the address of the forwarding router. Data traffic is forwarded to
this router. If the forwarding address is 0.0.0.0, data traffic is forwarded to
the originating router.
External Route Tag Displays the 32-bit field attached to each external route. This field is not
used by the OSPF protocol, but can be used for external route
management.
show ip ospf database Displays OSPF database information.
link-state-id (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value
depends on the LSA type, and it can be one of the following:
• the network’s IP address for Type 3 LSAs or Type 5 LSAs
• the router’s OSPF router ID for Type 1 LSAs or Type 4 LSAs
• the default destination (0.0.0.0) for Type 5 LSAs
adv-router
ip-address
EXEC privilege
(OPTIONAL) Enter the keywords adv-router ip-address to display only the
LSA information about that router.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
FTOS Command Reference, version 7.6.1.0 523