FTOS Command Reference for the S-Series - Force10 Networks

More documents

Recommendations

Info

clear ip prefix-list • show ip prefix-list detail on page 366 • show ip prefix-list summary on page 366 clear ip prefix-list c e s Reset the number of times traffic met the conditions (“hit” counters) of the configured prefix lists. Syntax clear ip prefix-list [prefix-name] Parameters Command Modes EXEC privilege Command History Default Clears “hit” counters for all prefix lists unless a prefix list is specified. Related Commands deny c e s Configure a filter to drop packets meeting the criteria specified. Syntax deny ip-prefix [ge min-prefix-length] [le max-prefix-length] Parameters To delete a drop filter, use the no deny ip-prefix command. Defaults Not configured. Command Modes PREFIX-LIST prefix-name (OPTIONAL) Enter the name of the configured prefix list to clear only counters for that prefix list. Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series pre-Version 6.1.1.0 Introduced for E-Series ip prefix-list Configure a prefix list. ip-prefix Specify an IP prefix in the network/length format. For example, 35.0.0.0/8 means match the first 8 bits of address 35.0.0.0. ge min-prefix-length (OPTIONAL) Enter the keyword ge followed by the minimum prefix length, which is a number from zero (0) to 32. le max-prefix-length (OPTIONAL) Enter the keyword le followed by the maximum prefix length, which is a number from zero (0) to 32. 362 Access Control Lists
Command History Usage Information Related Commands ip prefix-list Sequence numbers for this filter are automatically assigned starting at sequence number 5. If the options ge or le are not used, only packets with an exact match to the prefix are filtered. ip prefix-list c e s Enter the PREFIX-LIST mode and configure a prefix list. Syntax ip prefix-list prefix-name Parameters Command Modes CONFIGURATION Command History Usage Information Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series pre-Version 6.1.1.0 Introduced for E-Series permit Configure a filter to pass packets. seq Configure a drop or permit filter with a specified sequence number. To delete a prefix list, use the no ip prefix-list prefix-name command. prefix-name Enter a string up to 16 characters long as the name of the prefix list. Version 7.6.1.0 Support added for S-Series Version 7.5.1.0 Support added for C-Series pre-Version 6.1.1.0 Introduced for E-Series Prefix lists redistribute OSPF and RIP routes meeting specific criteria. permit c e s Configure a filter that passes packets meeting the criteria specified. Syntax permit ip-prefix [ge min-prefix-length] [le max-prefix-length] To delete a forward filter, use the no permit ip-prefix command. FTOS Command Line Interface Reference, version 7.6.1.0 363
Page 1 and 2:
FTOS Command Reference for the S-Se
Page 3 and 4:
Listed below are the new features i
Page 5 and 6:
Layer 3 Management • Shared LAG S
Page 7 and 8:
Contents New Features . . . . . . .
Page 9 and 10:
Chapter 3 Control and Monitoring Co
Page 11 and 12:
Chapter 5 RMON . . . . . . . . . .
Page 13 and 14:
dot1x reauthentication . . . . . .
Page 15 and 16:
port-channel-protocol lacp . . . .
Page 17 and 18:
permit . . . . . . . . . . . . . .
Page 19 and 20:
show arp . . . . . . . . . . . . .
Page 21 and 22:
clear ip ospf statistics . . . . .
Page 23:
show ip mroute . . . . . . . . . .
Page 26 and 27:
26 Figure 35 show software ifm clie
Page 28 and 29:
28 Figure 121 show config Command E
Page 31 and 32:
List of Tables Table 1 Information
Page 33 and 34:
Preface About this Guide This book
Page 35 and 36:
Related Documents For more informat
Page 37 and 38:
Chapter 1 CLI Basics This chapter d
Page 39 and 40:
Obtaining Help Table 2 Command Prom
Page 41 and 42:
Table 3 Short-cut Keys and their Ac
Page 43 and 44:
EXEC Privilege Mode The EXEC privil
Page 45 and 46:
2. Use the mac access-list standard
Page 47 and 48:
SPANNING TREE Mode Use the protocol
Page 49 and 50:
2. Use the router ospf {process-id}
Page 51 and 52:
This chapter contains commands need
Page 53 and 54:
delete delete For example, when usi
Page 55 and 56:
pwd Syntax pwd Command Modes EXEC p
Page 57 and 58:
Example Figure 9 show file-system C
Page 59 and 60:
show running-config show running-co
Page 61 and 62:
Example Example Usage Information F
Page 63 and 64:
upgrade (S-Series) s Upgrade the bo
Page 65 and 66:
Chapter 3 Control and Monitoring Co
Page 67 and 68:
Related Commands banner login c e s
Page 69 and 70:
Command History Related Commands co
Page 71 and 72:
Example Related Commands Figure 20
Page 73 and 74:
exit ce s Return to the lower comma
Page 75 and 76:
Parameters ip ftp username Defaults
Page 77 and 78:
Parameters ip tftp source-interface
Page 79 and 80:
Usage Information You cannot delete
Page 81 and 82:
eload c e s Reboot the FTOS. Syntax
Page 83 and 84:
Defaults None. Command Mode EXEC EX
Page 85 and 86:
show debugging c e s View a list of
Page 87 and 88:
Syntax show inventory [media slot]
Page 89 and 90:
Example 2 Example 3 Force10#show pr
Page 91 and 92:
Example Example Example Force10# sh
Page 93 and 94:
Usage Information Example show proc
Page 95 and 96:
Table 6 defines the fields that app
Page 97 and 98:
Command History Example Related Com
Page 99 and 100:
Example Related Commands Force10#sh
Page 101 and 102:
Parameters Defaults 24 lines Comman
Page 103 and 104:
undebug all c e s Disable all debug
Page 105 and 106:
Chapter 4 SNMP and Syslog Commands
Page 107 and 108:
Command History Related Commands sh
Page 109 and 110:
snmp-server community c e s Configu
Page 111 and 112:
Parameters Defaults Not enabled. Co
Page 113 and 114:
Parameters snmp-server group To rem
Page 115 and 116:
Defaults As shown Command Modes CON
Page 117 and 118:
Command Modes CONFIGURATION Command
Page 119 and 120:
Defaults As above Command Modes CON
Page 121 and 122:
Related Commands snmp trap link-sta
Page 123 and 124:
default logging console c e s Retur
Page 125 and 126:
Parameters logging console To retur
Page 127 and 128:
Defaults local7 Command Modes CONFI
Page 129 and 130:
Command History Related Commands lo
Page 131 and 132:
Parameters logging trap Defaults Di
Page 133 and 134:
show logging driverlog stack-unit (
Page 135 and 136:
Chapter 5 RMON The FTOS Remote Netw
Page 137 and 138:
Default owner Command Modes CONFIGU
Page 139 and 140:
Defaults as described above Command
Page 141 and 142:
show rmon alarms c e s Display the
Page 143 and 144:
Example 1 Example 2 Figure 49 show
Page 145 and 146:
Page 147 and 148:
Example 1 Example 2 Force10#show rm
Page 149 and 150:
Chapter 6 Time Commands The command
Page 151 and 152:
clock read-calendar clock read-cale
Page 153 and 154:
Defaults Not configured. Command Mo
Page 155 and 156:
Default Not configured. Command Mod
Page 157 and 158:
ntp authentication-key c e s Specif
Page 159 and 160:
Command History Usage Information R
Page 161 and 162:
Defaults Not enabled. Command Modes
Page 163 and 164:
Related Commands show ntp status c
Page 165 and 166:
Chapter 7 Security Commands This ch
Page 167 and 168:
aaa accounting suppress aaa account
Page 169 and 170:
Defaults Not configured Command Mod
Page 171 and 172:
Authentication and Password This se
Page 173 and 174:
Parameters Default Not configured (
Page 175 and 176:
Defaults No password is configured.
Page 177 and 178:
Usage Information Related Commands
Page 179 and 180:
password-attributes c e s Enable th
Page 181 and 182:
show users c e s View information o
Page 183 and 184:
Page 185 and 186:
Command History radius-server deadt
Page 187 and 188:
adius-server key radius-server key
Page 189 and 190:
Command History Related Commands TA
Page 191 and 192:
Page 193 and 194:
The 802.1x Port Authentication comm
Page 195 and 196:
Related Commands dot1x auth-server
Page 197 and 198:
dot1x port-control c e s Enable por
Page 199 and 200:
dot1x server-timeout c e s Configur
Page 201 and 202:
Example Force10#show dot1x int Gi 2
Page 203 and 204:
debug ip ssh c e s Enables collecti
Page 205 and 206:
Command History ip ssh hostbased-au
Page 207 and 208:
ip ssh pub-key-file c e s Specify t
Page 209 and 210:
Page 211 and 212:
Defaults No default behavior or val
Page 213 and 214:
show ip ssh rsa-authentication c e
Page 215 and 216:
Chapter 8 Storm Control The FTOS St
Page 217 and 218:
Syntax show storm-control multicast
Page 219 and 220:
Parameters Defaults No default beha
Page 221 and 222:
Usage Information storm-control mul
Page 223 and 224:
Defaults No default behavior or val
Page 225 and 226:
Chapter 9 Interface Commands The ch
Page 227 and 228:
clear counters clear counters c e s
Page 229 and 230:
Page 231 and 232:
interface null c e s Configure a Nu
Page 233 and 234:
Example Example Example Example Exa
Page 235 and 236:
Defaults This command has no defaul
Page 237 and 238:
Parameters Defaults Not configured,
Page 239 and 240:
Example systest-3 Monitor time: 00:
Page 241 and 242:
Page 243 and 244:
Related Commands negotiation auto
Page 245 and 246:
Related Commands show config Figure
Page 247 and 248:
Example 1 Force10#show interfaces t
Page 249 and 250:
Example 2 Force10#show interfaces t
Page 251 and 252:
show interfaces configured c e s Vi
Page 253 and 254:
show interfaces description c e s V
Page 255 and 256:
Parameters Command Modes EXEC Comma
Page 257 and 258:
Parameters Defaults auto Command Mo
Page 259 and 260:
Port Channel Commands channel-membe
Page 261 and 262:
Related Commands group c e s Group
Page 263 and 264:
minimum-links minimum-links c e s C
Page 265 and 266:
Command Modes EXEC Command History
Page 267 and 268:
Related Commands Table 18 show inte
Page 269 and 270:
Chapter 10 LACP This chapter contai
Page 271 and 272:
Command History lacp long-timeout c
Page 273 and 274:
Defaults off Command Modes INTERFAC
Page 275 and 276:
Related Commands clear lacp counter
Page 277 and 278:
Chapter 11 Layer 2 MAC Addressing T
Page 279 and 280:
Page 281 and 282:
Parameterse Virtual LANs (VLANs) Ta
Page 283 and 284:
name c e s Assign a name to the VLA
Page 285 and 286:
Related Commands Figure 115 show vl
Page 287 and 288:
Page 289 and 290:
Chapter 12 GVRP (GARP VLAN Registra
Page 291 and 292:
clear gvrp statistics c e s Clear G
Page 293 and 294:
Parameters To return to the previou
Page 295 and 296:
Related Commands protocol gvrp The
Page 297 and 298:
Page 299 and 300:
Related Commands A failed registrat
Page 301 and 302:
Chapter 13 Stackable VLANs With the
Page 303 and 304:
Usage Information vlan-stack compat
Page 305 and 306:
Example vlan-stack trunk Figure 117
Page 307 and 308:
Chapter 14 Access Control Lists Sta
Page 309 and 310:
Related Commands ip access-list sta
Page 311 and 312: Related Commands remark The monitor
Page 313 and 314: esequence prefix-list ipv4 c e s Re
Page 315 and 316: Related Commands Extended IP ACLs N
Page 317 and 318: Related Commands deny arp The monit
Page 319 and 320: Parameters To remove this filter, u
Page 321 and 322: Defaults Not configured Command Mod
Page 323 and 324: deny tcp c e s Configure a filter t
Page 325 and 326: Related Commands deny udp Most ACL
Page 327 and 328: Related Commands ip access-list ext
Page 329 and 330: Defaults Not configured. Command Mo
Page 333 and 334: permit icmp The monitor option is r
Page 335 and 336: Parameters Defaults Not configured.
Page 337 and 338: permit udp c e s Configure a filter
Page 339 and 340: esequence access-list c e s Re-assi
Page 347 and 348: Command Modes EXEC privilege Comman
Page 349 and 350: Parameters Command Modes EXEC Comma
Page 351 and 352: Related Commands mac access-list st
Page 353 and 354: seq c e s Assign a sequence number
Page 359 and 360: Command History Related Commands Co
Page 361: Parameters Command Modes EXEC Comma
Page 367 and 368: Example Figure 128 show ip prefix-l
Page 369 and 370: Related Commands match as-path •
Page 375 and 376: Command Modes ROUTE-MAP match route
Page 377 and 378: Defaults Not configured If no keywo
Page 379 and 380: Parameters set community To insert
Page 381 and 382: Command History Related Commands se
Page 383 and 384: Command History Related Commands se
Page 385 and 386: set weight set weight c e s Configu
Page 387 and 388: Chapter 15 Port Monitoring The Port
Page 389 and 390: Command Modes MONITOR SESSION (conf
Page 391 and 392: source c e s Configure a monitor so
Page 393 and 394: Chapter 16 IP Routing Commands The
Page 395 and 396: arp ces Use Address Resolution Prot
Page 397 and 398: Command Modes EXEC privilege Comman
Page 399 and 400: Parameters Command Modes EXEC privi
Page 401 and 402: debug ip icmp c e s View informatio
Page 403 and 404: Example Usage Information Figure 13
Page 405 and 406: Command History Usage Information R
Page 407 and 408: Related Commands • specify a doma
Page 409 and 410: Usage Information ip helper-address
Page 411 and 412: ip mtu ip mtu c e s Set the IP MTU
Page 413 and 414:
Usage Information ip proxy-arp FTOS
Page 415 and 416:
Page 417 and 418:
load-balance (C-Series and S-Series
Page 419 and 420:
Command History Example Version 7.6
Page 421 and 422:
Related Commands Table 29 defines t
Page 423 and 424:
Example 2 Table 30 show ip cam Comm
Page 425 and 426:
Example Force10>show ip fib linecar
Page 427 and 428:
show ip interface c e s View IP-rel
Page 429 and 430:
show ip management-route c e s View
Page 431 and 432:
Page 433 and 434:
show ip route list c e s View IP ro
Page 435 and 436:
Example Force10#Force10#show ip tra
Page 437 and 438:
Parameters Defaults No default beha
Page 439 and 440:
Table 39 show tcp statistics cp Com
Page 441 and 442:
Chapter 17 VRRP Commands Use the co
Page 443 and 444:
Usage Information clear counters vr
Page 445 and 446:
Command Modes VRRP Command History
Page 447 and 448:
show config c e s View the non-defa
Page 449 and 450:
Force10>show vrrp -----------------
Page 451 and 452:
Usage Information virtual-address I
Page 453 and 454:
Chapter 18 PVST+ The FTOS implement
Page 455 and 456:
show spanning-tree pvst c e s View
Page 457 and 458:
Example 2 Example 3 Force10#show sp
Page 459 and 460:
Defaults Not Configured Command Mod
Page 461 and 462:
Command Modes CONFIGURATION (conf-p
Page 463 and 464:
Defaults 20 seconds Command Modes C
Page 465 and 466:
Chapter 19 RSTP The FTOS implementa
Page 467 and 468:
Example disable c e s Disable RSTP
Page 469 and 470:
Parameters Defaults 20 seconds Comm
Page 471 and 472:
Example 1 Example 2 Force10#show sp
Page 473 and 474:
Example Figure 164 spanning-tree rs
Page 475 and 476:
Chapter 20 MSTP Multiple Spanning T
Page 477 and 478:
To enable Multiple Spanning Tree Pr
Page 479 and 480:
Command History Related Commands ma
Page 481 and 482:
Command Modes MULTIPLE SPANNING TRE
Page 483 and 484:
Command Modes MULTIPLE SPANNING TRE
Page 485 and 486:
Example 2 Usage Information Figure
Page 487 and 488:
spanning-tree mstp edge-port spanni
Page 489 and 490:
Chapter 21 OSPF Open Shortest Path
Page 491 and 492:
area default-cost area default-cost
Page 493 and 494:
Syntax area area-id stub [no-summar
Page 495 and 496:
Syntax auto-cost [reference-bandwid
Page 497 and 498:
Example Version 7.5.1.0 Introduced
Page 499 and 500:
Command History Related Commands de
Page 501 and 502:
Parameters Defaults external dist3
Page 503 and 504:
Command Modes ROUTER OSPF Command H
Page 505 and 506:
ip ospf cost c e s Change the cost
Page 507 and 508:
Parameters Defaults No MD5 authenti
Page 509 and 510:
ip ospf retransmit-interval Use thi
Page 511 and 512:
network area c e s Define which int
Page 513 and 514:
• Remove the interface from the p
Page 515 and 516:
Syntax router-id ip-address Paramet
Page 517 and 518:
Command History Usage Information E
Page 519 and 520:
Example Related Commands Force10>sh
Page 521 and 522:
Related Commands show ip ospf datab
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Page 529 and 530:
Example Force10#show ip ospf databa
Page 531 and 532:
Example Force10#show ip ospf databa
Page 533 and 534:
Example Force10>show ip ospf int Fi
Page 535 and 536:
Command History Usage Information E
Page 537 and 538:
Table 53 show ip ospf statistics gl
Page 539 and 540:
Example Figure 188 show ip ospf top
Page 541 and 542:
timers spf timers spf c e s Set the
Page 543 and 544:
Chapter 22 Quality of Service Per-P
Page 545 and 546:
Command History service-class dynam
Page 547 and 548:
Syntax class-map {match-all | match
Page 549 and 550:
Command Modes CONFIGURATION (config
Page 551 and 552:
Related Commands policy-aggregate U
Page 553 and 554:
Defaults Layer 3 Command Modes CONF
Page 555 and 556:
Command History Usage Information s
Page 557 and 558:
show qos class-map c e s View the c
Page 559 and 560:
Page 561 and 562:
Example Figure 196 show qos qos-pol
Page 563 and 564:
Chapter 23 Multicast IPv4 Multicast
Page 565 and 566:
IGMP Commands Table 56 show ip mrou
Page 567 and 568:
Defaults Disabled Command Modes EXE
Page 569 and 570:
show ip igmp groups c e s Display t
Page 571 and 572:
Example Force10#show ip igmp interf
Page 573 and 574:
debug ip igmp • When enabled, IGM
Page 575 and 576:
Usage Information ip igmp snooping
Page 577 and 578:
Usage Information show ip igmp snoo
Page 579 and 580:
Appendix A ICMP Message Types Table
Page 581 and 582:
Appendix B SNMP Traps Table 59 list
Page 583 and 584:
Table 59 SNMP Traps and Error Messa
Page 585 and 586:
Index Symbols (IFM (interface manag
Page 587 and 588:
dot1x reauth-max 198 dot1x server-t
Page 589 and 590:
max-age (RSTP) 468 max-hops (MSTP)
Page 591 and 592:
set metric-type (Route Map) 382 set
Page 593 and 594:
VLAN-Stacking 301 VRRP 441 vrrp-gro
Page 595 and 596:
A aaa accounting 166 aaa accounting
Page 597 and 598:
ip unreachables 416 negotiation aut
Page 599 and 600:
permit udp (Extended IP ACL) 337 pi
Page 601 and 602:
show snmp engineID 107 show snmp gr
show all

FTOS Command Reference for the S-Series - Force10 Networks

Create successful ePaper yourself

Delete template?

Save as template?