FTOS Command Reference for the S-Series - Force10 Networks

distance
Command Modes ROUTER OSPF
Command
History
Related
Commands
distance
c e s Define an administrative distance for particular routes to a specific IP address.
Syntax distance weight [ip-address mask access-list-name]
Parameters
Defaults 110
Command Modes ROUTER OSPF
Command
History
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
show ip ospf asbr Display VLAN configuration.
To delete the settings, use the no distance weight [ip-address mask access-list-name]
command.
weight Specify an administrative distance.
Range: 1 to 255.
Default: 110
ip-address (OPTIONAL) Enter a router ID in the dotted decimal format.
If you enter a router ID, you must include the mask for that router
address.
mask (OPTIONAL) Enter a mask in dotted decimal format or /n format.
access-list-name (OPTIONAL) Enter the name of an IP standard access list.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
distance ospf
c e s Configure an OSPF distance metric for different types of routes.
Syntax distance ospf [external dist3] [inter-area dist2] [intra-area dist1]
To delete these settings, enter no distance ospf.
500 OSPF