FTOS Command Reference for the S-Series - Force10 Networks

show ip igmp interface
Table 57 defines the fields displayed in Figure 199.
show ip igmp interface
c e s View information on the interfaces participating in IGMP.
Syntax show ip igmp interface [interface]
Parameters
Command Modes EXEC
Command
History
Usage
Information
Table 57 show ip igmp groups Command Example Fields
Field Description
Group Address Lists the multicast address for the IGMP group.
Interface Lists the interface type, slot and port number.
Uptime Displays the amount of time the group has been operational.
Expires Displays the amount of time until the entry expires.
Last Reporter Displays the IP address of the last host to be a member of the
IGMP group.
interface (OPTIONAL) Enter the interface type and slot/port information:
• For a 100/1000 Ethernet interface, enter the keyword gigabitethernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet
followed by the slot/port information.
• For a Loopback interface, enter the keyword loopback followed by a number
from 0 to 16383.
• For a SONET interface, enter the keyword sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword tengigabitethernet
followed by the slot/port information.
EXEC privilege
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series legacy command
IGMP commands accept only non-VLAN interfaces—specifying VLAN will not yield a
results.
570 Multicast IPv4