FTOS Command Reference for the S-Series - Force10 Networks

debug ip packet
debug ip packet
c e s View a log of IP packets sent and received.
Syntax debug ip packet [access-group name ] [count value] [interface]
Parameters
Command Mode EXEC privilege
Command
History
To disable debugging, use the no debug ip packet [access-group name ] [count value]
[interface] command.
access-group name C-Series and E-Series only: Enter the keyword access-group
followed by the access list name (maximum 16 characters) to limit the
debug output based on the defined rules in the ACL.
count value (OPTIONAL) Enter the keyword count followed by the count value.
Range: 1 to 65534
Default: Infinity
interface (OPTIONAL) Enter the following keywords and slot/port or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword
gigabitethernet followed by the slot/port information.
• For the management interface on the RPM, enter the keyword
managementethernet followed by the slot/port information.
The slot range is 0-1 and the port range is 0.
• For a Port Channel interface, enter the keyword port-channel
followed by a number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale.
• For a SONET interface, enter the keyword sonet followed by the
slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1
to 4095.
Version 7.6.1.0 Added the access-group option on the C- Series and E-Series Only.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 6.3.1.0 Added the count option
402 IP Routing Commands