FTOS Command Reference for the S-Series - Force10 Networks

Parameters
Defaults external dist3 = 110; inter-area dist2 = 110; intra-area dist1 = 110.
Command Modes ROUTER OSPF
Command
History
Usage
Information
distribute-list in
external dist3 (OPTIONAL) Enter the keyword external followed by a number to
specify a distance for external type 5 and 7 routes.
Range: 1 to 255
Default: 110.
inter-area dist2 (OPTIONAL) Enter the keyword inter-area followed by a number to
specify a distance metric for routes between areas.
Range: 1 to 255
Default: 110.
intra-area dist1 (OPTIONAL) Enter the keyword intra-area followed by a number to
specify a distance metric for all routes within an area.
Range: 1 to 255
Default: 110.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.1.1.1 Introduced on E-Series
To specify a distance for routes learned from other routing domains, use the redistribute
command.
distribute-list in
c e s Apply a filter to incoming routing updates from OSPF to the routing table.
Syntax distribute-list prefix-list-name in [interface]
To delete a filter, use the no distribute-list prefix-list-name in [interface] command.
FTOS Command Reference, version 7.6.1.0 501