FTOS Command Reference for the S-Series - Force10 Networks

Command Modes EXEC privilege
Command
History
clear host
c e s Remove one or all dynamically learnt host table entries.
Syntax clear host name
Parameters
Command Modes EXEC privilege
Command
History
clear ip fib linecard
c e s Clear all Forwarding Information Base (fib) entries in the specified line card (use this
command with caution, see Usage Information below)
Syntax clear ip fib linecard slot-number
Parameters
Command Mode EXEC
clear host
ip ip-address (OPTIONAL) Enter the keyword ip followed by the IP address of the ARP
entry you wish to clear.
no-refresh (OPTIONAL) Enter the keyword no-refresh to delete the ARP entry from
CAM. Or use this option with interface or ip ip-address to specify which
dynamic ARP entires you want to delete.
Note: Transit traffic may not be forwarded during the period when deleted
ARP entries are resolved again and re-installed in CAM. Use this
option with extreme caution.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
name Enter the name of the host to delete.
Enter * to delete all host table entries.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
slot-number Enter the number of the line card slot.
C-Series and S-Series Range: 0-7
E-Series Range: 0 to 13 on E1200, 0 to 6 on E600/E600i; 0 to 5 on E300
FTOS Command Reference, version 7.6.1.0 397