FTOS Command Reference for the S-Series - Force10 Networks

Parameters
Command Modes EXEC privilege
Command
History
debug arp
c e s View information on ARP transactions.
Syntax debug arp [interface] [count value]
Parameters
Command Modes EXEC privilege
Command
History
To stop debugging ARP transactions, enter no debug arp.
debug arp
all Enter the keyword all to clear all TCP statistics maintained on all switch processors.
cp (OPTIONAL) Enter the cp to clear only statistics from the Control Processor.
rp1 (OPTIONAL) Enter the keyword rp1 to clear only the statistics from Route Processor 1.
rp2 (OPTIONAL) Enter the keyword rp2 to clear only the statistics from Route Processor 2.
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
pre-Version 6.2.1.1 Introduced on E-Series
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword gigabitethernet
followed by the slot/port information.
• For the Management interface, enter the keyword managementethernet
followed by the slot/port information. The slot range is 0-1 and the port range is
0.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series Range: 1-128
E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale.
• For a SONET interface, enter the keyword sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet followed by the slot/port information.
• For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
count value (OPTIONAL) Enter the keyword count followed by the count value.
Range: 1 to 65534
Version 7.6.1.0 Introduced on S-Series
Version 7.5.1.0 Introduced on C-Series
Version 6.3.1.0 Added the count option
FTOS Command Reference, version 7.6.1.0 399