FTOS Command Reference for the S-Series - Force10 Networks

dot1x tx-period
dot1x tx-period
c e s Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE.
Syntax dot1x tx-period seconds
Parameters
Defaults 30 seconds
Command Modes INTERFACE
Command
History
To return to the default, use the no dot1x tx-period command.
show dot1x interface
c e s Display the 802.1x information on an interface.
Syntax show dot1x interface interface
Parameters
Defaults No default values or behavior
Command Modes EXEC
Command
History
seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted.
Range: 1 to 31536000 (1 year)
Default: 30
Version 7.6.1.0 Introduced on C-Series and S-Series
Version 7.4.1.0 Introduced on E-Series
interface Enter one of the following keywords and slot/port or number information:
• For a Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a Fast Ethernet interface, enter the keyword FastEthernet followed by
the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
EXEC privilege
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
200 Security Commands