FTOS Command Reference for the S-Series - Force10 Networks

Parameters
ip ftp username
Defaults The IP address on the system that is closest to the Telnet address is used in the outgoing
packets.
Command Modes CONFIGURATION
Command
History
Related
Commands
ip ftp username
c e s Assign a user name for outgoing FTP connection requests.
Syntax ip ftp username username
Parameters
To return to anonymous FTP connections, use the no ip ftp username [username]
command.
Defaults No user name is configured.
Command Modes CONFIGURATION
interface Enter the following keywords and slot/port or number information:
• For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
followed by the slot/port information.
• For Loopback interfaces, enter the keyword loopback followed by a number
from zero (0) to 16383.
• For a Port Channel interface, enter the keyword port-channel followed by a
number:
C-Series and S-Series: 1-128
E-Series: 1 to 32 for EtherScale, 1 to 255 for TeraScale
• For SONET interface types, enter the keyword sonet followed by the slot/port
information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a VLAN interface, enter the keyword vlan followed by a number from 1 to
4094.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Introduced on C-Series
E-Series original Command
copy Copy files from and to the switch.
username Enter a text string as the user name up to 40 characters long.
FTOS Command Reference, version 7.6.1.0 75