FTOS Command Reference for the S-Series - Force10 Networks

show mac-address-table
Command Modes EXEC
Example
vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to
view the MAC address assigned to the VLAN.
Range: 1 to 4094.
count (OPTIONAL) Enter the keyword count, followed optionally, by an
interface or VLAN ID, to display total or interface-specific static
addresses, dynamic addresses, and MAC addresses in use.
EXEC privilege
Force10#show mac-address-table
VlanId Mac Address Type Interface State
999 00:00:00:00:00:19 Dynamic Gi 0/1 Active
999 00:00:00:00:00:29 Dynamic Gi 0/2 Active
Force10#
Figure 111 show mac-address-table
Table 20 defines the column headings in Figure 111.
Table 20 show mac-address-table Information
Column Heading Description
VlanId Displays the VLAN ID number.
Mac Address Displays the MAC address in nn:nn:nn:nn:nn:nn format.
Type Lists whether the MAC address was manually configured (Static) or learned
(Dynamic).
Interface Displays the interface type and slot/port information. The following
abbreviations describe the interface types:
• gi—Gigabit Ethernet followed by a slot/port.
• po—Port Channel followed by a number. Range: 1 to 32 for EtherScale, 1
to 255 for TeraScale
• so—Sonet followed by a slot/port.
• te—10-Gigabit Ethernet followed by a slot/port.
State Lists if the MAC address is in use (Active) or not in use (Inactive).
Force10#show mac-address-table count
MAC Entries for all vlans :
Dynamic Address Count : 5
Static Address (User-defined) Count : 0
Total MAC Addresses in Use: 5
Force10#
Figure 112 show mac-address-table count
Table 21 defines the information displayed in Figure 112.
280 Layer 2