FTOS Command Reference for the S-Series - Force10 Networks

Defaults Not configured.
Command Modes CONFIGURATION
Command
History
Usage
Information
Related
Commands
RADIUS
password
password
LINE
To view the defined user names, use the show running-config user command.
Below are the RADIUS commands supported by FTOS.
• debug radius on page 184
• ip radius source-interface on page 184
• radius-server deadtime on page 185
• radius-server host on page 185
• radius-server key on page 187
• radius-server retransmit on page 188
• radius-server timeout on page 188
(OPTIONAL) Enter the keyword password followed by the
encryption-type or a text string (up to 32 characters long) as the
password.
username
encryption-type (OPTIONAL) Enter an encryption type for the password entered. The
options are:
• 0 is the default and FTOS stores the password as clear text.
• 7 to encrypt the password.
privilege level (OPTIONAL) Enter the keyword privilege followed by a number from zero
(0) to 15.
Version 7.6.1.0 Introduced for S-Series
Version 7.5.1.0 Introduced for C-Series
E-Series original Command
show running-config View the current configuration.
FTOS Command Reference, version 7.6.1.0 183