FTOS Command Reference for the S-Series - Force10 Networks

Defaults Not configured
Command Modes ROUTE-MAP
Command
History
Related
Commands
match ip address
c e s Configure a filter to match routes based on IP addresses specified in an access list.
Syntax match ip address prefix-list-name
Parameters
To delete a match, use the no match ip address prefix-list-name command.
Defaults Not configured.
Command Modes ROUTE-MAP
Command
History
Related
Commands
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
match ip address Redistribute routes that match an IP address.
match ip next-hop Redistribute routes that match the next-hop IP address.
match ip address
match ip route-source Redistribute routes that match routes advertised by other routers.
match metric Redistribute routes that match a specific metric.
match route-type Redistribute routes that match a route type.
match tag Redistribute routes that match a specific tag.
prefix-list-name Enter the name of configured prefix list.
Version 7.6.1.0 Support added for S-Series
Version 7.5.1.0 Support added for C-Series
pre-Version 6.1.1.0 Introduced for E-Series
match interface Redistribute routes that match the next-hop interface.
match ip next-hop Redistribute routes that match the next-hop IP address.
match ip route-source Redistribute routes that match routes advertised by other routers.
match metric Redistribute routes that match a specific metric.
match route-type Redistribute routes that match a route type.
match tag Redistribute routes that match a specific tag.
FTOS Command Line Interface Reference, version 7.6.1.0 371