Humminbird - Fish Finders and GPS

Units - Depth
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup menu.
Units - Depth selects the units of measure
for all depth-related readouts.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Units - Depth setting. (Meters [International models only], Feet,
Fathoms; Default is Meters for International models, and Feet for
Domestic models)
Units - Temp
(International only)
Units - Temp selects the units of measure for all temperature-related
readouts. International models only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Units - Temp setting. (Celsius, Fahrenheit; Default = Celsius)
Units - Distance
(with Speed input only)
Units - Distance selects the units of measure for all distance-related
readouts.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the
Units - Distance setting. (Domestic Models: Statute Miles, Nautical
Miles; Default = Statute Miles; International Models:
Meters/Kilometers, Meters/Nautical Miles, Feet/Statute Miles,
Feet/Nautical Miles; Default = Meters/Kilometers)
Units - Speed
(with Speed input only)
Units - Speed selects the units of measure for speed-related readouts.
To change the Units - Speed setting:
1. Highlight Units - Speed on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units -
Speed setting. (kph [International models only], mph, kts, Default =
kph for International models and mph for Domestic models)
109