Humminbird - Fish Finders and GPS

More documents

Recommendations

Info

INFO Key Press the INFO key while in any navigation view to display information about objects that are nearest to an active cursor. If the cursor is not active, the following menu will be displayed. Use the 4-WAY Cursor Control key to select Nearest Port, Nearest Tide Station or Nearest Current Station, then use the RIGHT Cursor key to display the requested information. NOTE: The built-in UniMap does not contain Port, Tide or Current information. This information is only available from optional purchase MMC/SD cards. MARK Key Press the MARK key while in any view to mark the position of a waypoint, either at the current boat location, or, if the Cursor is active, at the current Cursor location. The MARK key only functions if you have the GPS receiver connected, or if you have enabled Screen Snapshot from the Accessories menu tab. If you have enabled the Screen Snapshot feature, pressing the MARK key still creates a waypoint, but it also captures the screen image to the optionalpurchase MMC/SD card. NOTE: You must have an optional-purchase MMC/SD card installed for the screen snapshot feature to work. Navigation is not affected by the Screen Snapshot feature. Also, if Screen Snapshot is enabled but there is no GPS receiver connected, pressing the MARK key will capture the screen image and display an error saying that a GPS position fix is required to create a waypoint. GOTO Key The GOTO Key has multiple functions, depending on the situation: • If the Cursor is active, pressing the GOTO key while in any view creates a waypoint and starts navigation towards that waypoint. If the Cursor is not active, pressing the GOTO key displays the list of waypoints, so that you can select the waypoint towards which you want to navigate. • If the GOTO key is pressed and held for more than 1.5 seconds, the Man Overboard (MOB) function is activated. When MOB is activated, an MOB waypoint, which is a permanent, sharable waypoint with a large, distinctive icon, is created at the boat's current position (regardless of whether the chart cursor is active or not). Any current navigation will be cancelled and the current route discarded without user notification, and MOB navigation begins immediately. The view is switched to the Chart View automatically when MOB is activated, and it is not possible to activate MOB or modify the current route without first canceling MOB navigation. Any press of the GOTO key, or selection of a GOTO menu item, will cause an error beep and a short message will be displayed to the user that will disappear after 2 seconds. 37
Views ZOOM (+/-) Key Press the - or + ZOOM keys while in any of the Navigation Views or the Sonar Zoom View to change the scale of the view to appear closer or farther away. Press the - or + ZOOM keys while in the Side Imaging View to change the scale of the view. The cursor must be active for zoom to work in the Side Imaging View. The views available on your 900 Series are: Side Beam View Chart/Side Combo View Chart/Sonar Combo View Chart View Chart/Chart Combo View Chart/Birds’s Eye Combo View Bird’s Eye View Side Imaging View GPS Diagnostic View Sonar View Sonar Zoom View Split Sonar View Side/ Sonar Combo View Snapshot and Recording View Self Test View Accessory Test View • Side Imaging View • Sonar View • Sonar Zoom View • Split Sonar View • Side/Sonar Combo View • Snapshot and Recording View • Self Test View • Accessory Test View • GPS Diagnostic View • Bird’s Eye View • Chart/Bird’s Eye Combo View • Chart/Chart Combo View • Chart View • Chart/Sonar Combo View • Chart/Side Combo View • Side Beam View (only with optional-purchase QuadraBeam PLUS transducer) Chart/Side Combo View is the default view. When the VIEW key is pressed, the display cycles through the available views. When the EXIT key is pressed, the display cycles through the available views in reverse order. Any view can be hidden or displayed as part of the view rotation using the Views Menu tab. NOTE: When you change any menu settings that affect the sonar, the view will update immediately (i.e. you don’t have to exit the menu to apply the change to the screen). 38
Page 2 and 3: Thank You! Thank you for choosing H
Page 4 and 5: Table of Contents Views 38 Views an
Page 6 and 7: Table of Contents 455 kHz Sensitivi
Page 8 and 9: 900 Series Introduction Your 900 Se
Page 10 and 11: DualBeam PLUS Sonar Your 900 Series
Page 12 and 13: The following GPS functionality is
Page 14 and 15: Inside the boat there is often a ch
Page 16 and 17: 3 2 1 hole, then use it to mark the
Page 18 and 19: 1 Power 1 2 3 4 Plug Cable Connecto
Page 20 and 21: Transducer Installation There are t
Page 22 and 23: • The hydrodynamic shape of your
Page 24 and 25: To mount the transducer pivot assem
Page 26 and 27: 5/8” Hole Escutcheon Plate Cable
Page 28 and 29: GPS Receiver Installation To optimi
Page 30 and 31: Access Under Mounting Location No A
Page 32 and 33: Getting Started - Using Your 900 Se
Page 34 and 35: Understanding Sonar History It is i
Page 36 and 37: Understanding Side Imaging It is im
Page 38 and 39: Side Imaging Technology: How it wor
Page 40 and 41: Submerged Bridge: A Closer Perspect
Page 42 and 43: To adjust the backlight or to adjus
Page 46 and 47: Views and Readouts All views have a
Page 48 and 49: Sonar Zoom View Sonar Zoom View inc
Page 50 and 51: Side/Sonar Combo View Side/Sonar Co
Page 52 and 53: Screen Snapshot: When Screen Snapsh
Page 54 and 55: Playing back a recording: Highlight
Page 56 and 57: Classic layout: The top portion of
Page 58 and 59: Chart/Bird’s Eye Combo View Chart
Page 60 and 61: Chart View Chart View shows cartogr
Page 62 and 63: Chart/Side Combo View Chart/Side Co
Page 64 and 65: NOTE: The built-in UniMap does not
Page 66 and 67: Save, Edit, or Delete a Waypoint Sa
Page 68 and 69: Add or Remove a Trolling Grid: From
Page 70 and 71: Man Overboard (MOB) Navigation As s
Page 72 and 73: Start-Up Options Menu Press the MEN
Page 74 and 75: Self Test Self Test displays result
Page 76 and 77: Sonar X-Press Menu The Sonar X-Pres
Page 78 and 79: Upper Range (Advanced: Sonar, Split
Page 80 and 81: Bottom Lock (Sonar Zoom View only)
Page 82 and 83: SI Side SI Side sets which transduc
Page 84 and 85: Active Side Active Side allows you
Page 86 and 87: Save Current Route (Only when navig
Page 88 and 89: Delete allows you to delete a waypo
Page 90 and 91: Delete All Images (optional-purchas
Page 92 and 93: Stop Playback (optional-purchase MM
Page 94 and 95:
Fish ID+ Fish ID+ uses advanced sig
Page 96 and 97:
Bottom View Bottom View selects the
Page 98 and 99:
Surface Clutter (Advanced) Surface
Page 100 and 101:
Transducer Select Transducer Select
Page 102 and 103:
Saved Tracks Saved Tracks allows yo
Page 104 and 105:
North Reference North Reference all
Page 106 and 107:
Course Projection Line Course Proje
Page 108 and 109:
Map Borders Map Borders allows you
Page 110 and 111:
Set Map Offset (Advanced) Set Map O
Page 112 and 113:
To change the Fish ID Alarm setting
Page 114 and 115:
Arrival Alarm Arrival Alarm sounds
Page 116 and 117:
Units - Depth To change the Units -
Page 118 and 119:
Select Readouts Select Readouts (Ad
Page 120 and 121:
Aux Temp Offset (Advanced) Aux Temp
Page 122 and 123:
Digits Format (Advanced) Digits For
Page 124 and 125:
The following views are available:
Page 126 and 127:
To turn Screen Snapshot on or off:
Page 128 and 129:
Display Problems There are several
Page 130 and 131:
1-Year Limited Warranty We warrant
Page 132 and 133:
900 Series Accessories Accessories
Page 134 and 135:
Specifications Depth Capability . .
Page 136 and 137:
Glossary Display, FSTN: FSTN is an
Page 138 and 139:
Glossary QuadraBeam PLUS: QuadraBea
Page 140 and 141:
Glossary Transducer: The transducer
Page 142 and 143:
Glossary Cold Start: Cold Start ref
Page 144 and 145:
Glossary Speed Over Ground (SOG): S
Page 146:
Contact Humminbird® Contact the Hu
show all

Humminbird - Fish Finders and GPS

Create successful ePaper yourself

Delete template?

Save as template?