Chapter 1. Color Management Background - Kodak

More documents

Recommendations

Info

Chapter 4. Software Procedures CS600 Software Installation Uncheck both boxes. The CS600 software does not support this feature. 4. Select the Operator tab and set each Feature to “All allowed” or All disabled” as required by the printing application or customer site requirements. Operator is a restricted user (account) in the CS600 application. 5. Select the Key Operator tab and set each Feature to “All allowed” or All disabled” as required by the printing application or customer site requirements. 4 - 48 CS600 System Controller
Chapter 4. Software Procedures CS600 Software Installation Key operator is an administrator (account type) in the CS600 application. 6. For a full installation of the CS600 software, including the EFI User Software, continue with the “CS600 Ethernet Address Setup” procedure and then the “Command WorkStation Installation” procedure. For a CS600 system controller software upgrade, the installation is complete. 7. Complete a default configuration setup using EFI Command WorkStation 4 (CWS4) and Utility Workbench (UWB) such as a 4 over 4 system, and then set colors. 8. Print test patterns to confirm that the software is functioning properly. CS600 Ethernet Address Setup Note: If you have already installed a previous version of the CS600 controller software and you have already have a working setup, you can go to the next step. The CS600 controller has three network adapters controlling three Ethernet ports built into the system. The default port names assigned by Windows XP may not be consistent with the customer site requirements. Use the following procedure to configure the network for the specific installation. 1. Select Start " Settings " Network Connections to open the network connections window. 2. Enter changes to the parameters as indicated (see Table 4.5). Table 4.5 Network settings, CS600 system controller Adapter Device Used For Type Address Intel® Pro/1000 MT Desktop Adapter Intel® Pro/1000 MT Desktop Adapter #2 SIS 900 PCI Ethernet Adapter EFI-CS600 Controller TCP/IP IP Address 192.168.200.250 subnet mask 255.255.255.0 CS600 House Connection TCP/IP IP Address DHCP Automatic subnet DHCP Auto CS600 Axeda Connection TCP/IP IP Address DHCP Automatic subnet DHCP Auto Color Management and Workflow User Guide 4 - 49
Page 1:
VERSAMARK CS600 System Controller C
Page 4 and 5:
FCC Compliance Statement This equip
Page 7 and 8:
Contents Chapter 1. Color Managemen
Page 9 and 10:
Chapter 1. Color Management Backgro
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23:
Page 26 and 27:
Chapter 2. Using ColorWise Pro Tool
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73: Chapter 3. Using Monaco Profiler 3.
Page 74 and 75: Chapter 3. Using Monaco Profiler Th
Page 76 and 77: Chapter 4. Software Procedures The
Page 78 and 79: Chapter 4. Software Procedures DFE
Page 92 and 93: Chapter 4. Software Procedures CS60
Page 136: Chapter 4. Software Procedures CS60
show all

Chapter 1. Color Management Background - Kodak

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?