Chapter 1. Color Management Background - Kodak

More documents

Recommendations

Info

Chapter 4. Software Procedures CS600 Software Installation 7. Accept the default location for the program folder and click NEXT to continue the installation. 8. Click next to accept the default location for the files. Click NEXT to run the installation program. A progress screen appears. 9. When the installation program is complete, click FINISH on the last screen. 10. Continue with the “Utility Work Bench Installation” installation procedure. 4 - 58 CS600 System Controller
Utility Work Bench Installation Chapter 4. Software Procedures CS600 Software Installation The EFI Utility Work Bench utility allows the CS600 to monitor all blades without having to log in to each blade. This section describes how to reinstall Utility Work Bench program on the system controller after replacing the hard drive, the host controller PC, or reloading all the host controller PC software. Use the EFI user CD-ROM for this procedure. Install Utility Work Bench after installing Command Work Station 4. Use the following procedure to install the Utility Workbench utility on the host controller computer: 1. Open Windows Explorer and enter \\192.168.200.20\e$ in the Address field. 2. On the log-in screen, enter Administrator for the login and Fiery.1 for the password. 3. Browse to the efi directory and locate the uwb directory. 4. Copy the contents of the uwb directory to the C:\Program Files\Fiery directory on the host controller PC. 5. Open the CS600 software program and click the Utility Workbench icon. 6. Configure UWB for the address 192.168.200.20 and then close the program. 7. Continue with the “Hot Folders Installation” procedure, if required, and then complete the setup of the EFI User Software by checking that compatible job options, properties and registration marks have been entered. See Chapter 7, “Troubleshooting” and the CS600 and Command Workstation online help for detailed information about checking job setup and workflow. Color Management and Workflow User Guide 4 - 59
Page 1:
VERSAMARK CS600 System Controller C
Page 4 and 5:
FCC Compliance Statement This equip
Page 7 and 8:
Contents Chapter 1. Color Managemen
Page 9 and 10:
Chapter 1. Color Management Backgro
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23:
Page 26 and 27:
Chapter 2. Using ColorWise Pro Tool
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Chapter 3. Using Monaco Profiler 3.
Page 74 and 75:
Chapter 3. Using Monaco Profiler Th
Page 76 and 77:
Chapter 4. Software Procedures The
Page 78 and 79:
Chapter 4. Software Procedures DFE
Page 80 and 81:
Chapter 4. Software Procedures DFE
Page 82 and 83: Chapter 4. Software Procedures DFE
Page 92 and 93: Chapter 4. Software Procedures CS60
Page 136: Chapter 4. Software Procedures CS60
show all

Chapter 1. Color Management Background - Kodak

Create successful ePaper yourself

Delete template?

Save as template?