IBM IntelliStation - ps-2

Part
Number
Updated 07/01/03
Description
xSeries 305 I/O Options
Adapter
Length
PCI
Support 2
Slots
Supported
Storage Controllers1 06P5740 ServeRAID-4Lx Ultra160 SCSI Controller3 Half 64-bit 1
71P8592 ATA133 RAID Controller4 Half 32-bit 1
19K4646 PCI Wide Ultra160 SCSI Adapter 5
Half 32-bit 1, 2
71P8594 Single Channel Ultra320 SCSI Controller6 Networking
Half 64-bit 1, 2
7
Ethernet8 06P3601 10/100 Ethernet Server Adapter9 Half 32-bit 1
22P4901 10/100 Dual Port Server Adapter9 Half 64-bit 1
22P6801 PRO/1000XT Server Adapter by Intel (copper) w/CD, manuals 9
Half 64-bit 1
22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1, 2
31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 9
Half 64-bit 1, 2
31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) 9 Token Ring
Half 64-bit 1, 2
34L5001 16/4 Token-ring PCI Management Adapter9 Half 32-bit 1
07P2701 16/4 Token-ring Low Profile PCI Management Adapter9 Communications
Half 32-bit 2
10
System Management
09N7585 Remote Supervisor Adapter11 Half 32-bit 1
1. xSeries 305 has dual integrated EIDE (ATA-100) bus master controllers. SCSI models ship standard with a single-channel Ultra160 SCSI controller installed in slot
two. The SCSI controller includes a two-drop cable for connection to two internal HDDs. External connection of a SCSI device requires a supported SCSI adapter.
2. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot.
133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bit PCI-based servers.
3. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either
one internal or one external Ultra160 connection. External connector is 0.8mm VHDCI.
4. ATA133 RAID Controller (P/N 71P8592) supports RAID levels 0 and 1 on up to two ATA66, 100 or 133 EIDE HDDs. The dual channel IDE controller includes two
internal 40-pin connectors, two 18-inch single-drop IDE cables (P/N 02R0719) and two 23-inch two-drop IDE cables (P/N 02R0721).
5. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and one external 0.8mm VHDCI connector. Support for
external SCSI devices only. A five-drop terminated LVD SCSI cable is included but not supported for use in this server. This option includes brackets for both lowprofile
and full-size slots. SCSI models are equipped with the low-profile versiom of this adapter.
6. Single Channel Ultra320 SCSI Controller (P/N 71P8594) provides a single channel with one 68-pin internal connector, a four-drop
multimode terminated LVD SCSI cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized. Hardware
is included in the option to support either low-profile (2U) or full-size (3U) installations.
7. xSeries 305 includes dual full-duplex copper 10/100/1000Mbps Broadcom Ethernet controllers.
8. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended.
Installing fault-tolerant solutions provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible.
Two optional Ethernet adapters are copper and Intel-based (P/N 06P3601, 22P6801). Two adapters are Broadcom-based (P/N 22P7801, 31P6301).
9. Wake on LAN function provided with this networking adapter is supported by this server.
10. xSeries 305 includes two USB ports (front of chassis), a serial port, and video, keyboard and mouse ports.
11. The Remote Supervisor Adapter requires installation of the AC power adapter included with the option in order to operate in standby mode.
PCI slot 2
Slot 1: Bus 1, 64-bit, 66/100/133MHz PCI-X, full-size, half-length, 3.3v
Slot 2: Bus 2, 64-bit, 66/100/133MHz PCI-X, low-profile, half-length, 3.3v
PCI slot 1 xSeries 305 rear view
Note: When two 133MHz adapters are installed, the bus will operate at a maximum frequency of 100MHz. If only one
133MHz adapter is installed, the bus will support the rated frequency of the adapter. If a lower frequency adapter is
installed, the bus will be limited to the rated frequency of that adapter.
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
79
IBM xSeries 305