IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Part<br />
Number<br />
Updated 07/01/03<br />
Memory Description 1<br />
xSeries 445 Memory<br />
SBB<br />
Number 2<br />
33L5038 512MB DDR PC2100 ECC RDIMM 37L3538<br />
Total<br />
System<br />
Memory 1<br />
2GB<br />
(4x512MB)<br />
standard<br />
2, 3<br />
Quantity of RDIMMs Added<br />
512MB<br />
(33L5038)<br />
1GB<br />
(33L5039)<br />
2GB<br />
(33L5040)<br />
33L5039 1GB DDR PC2100 ECC RDIMM 33P3126 3GB 2 - -<br />
33L5040 2GB DDR PC2100 ECC RDIMM 32P9223 4GB 4 - -<br />
5GB 6 - -<br />
1. Due to two-way interleaving, installation of memory options in banks of<br />
6GB 8 - -<br />
two is required. Banks may be populated in any order. A minimum of two<br />
RDIMMs are required for each SMP Expansion Module (minimum of four<br />
required to enable memory mirroring).<br />
7GB<br />
8GB<br />
10<br />
12<br />
-<br />
-<br />
-<br />
-<br />
2. <strong>IBM</strong> offers configure-to-order (CTO) capability for selected products<br />
through Easy Access. Although similar to machine type models (MTM),<br />
9GB 14 - -<br />
CTO systems utilize different part numbers called Sales Building Blocks<br />
(SBB). The contents of an option may not entirely correspond to an SBB<br />
because only a certain component within an option package may be<br />
10GB<br />
11GB<br />
16<br />
18<br />
-<br />
-<br />
-<br />
-<br />
required to configure a specific system. Additional or different<br />
configuration rules or limitations may apply to the SBB. When a difference<br />
12GB 20 - -<br />
occurs, the rules will be documented in the tables, diagrams or footnotes.<br />
13GB 22 - -<br />
Notes:<br />
14GB 24 - -<br />
1. See numbering of RDIMM sockets on memory card for bank<br />
configuration.<br />
15GB 26 - -<br />
2. Performance is optimized by balancing the amount of memory<br />
between ports (and between SMP Expansion Modules).<br />
16GB 28 - -<br />
3. In order to enable memory mirroring during BIOS set-up, the same<br />
18GB 24 4 -<br />
memory configuration must be installed in each port (memory mirroring<br />
reduces the amount of memory available to the operating system by<br />
20GB 20 8 -<br />
half). Mirror banks 1, 3, 5, 7 with banks 2, 4, 6, 8 (see list of banks below<br />
memory card diagram).<br />
22GB 16 12 -<br />
4. Memory mirroring is specific to each SMP Expansion Module, but<br />
enabling mirroring in both SMP Expansion modules for eight-way systems<br />
is required.<br />
24GB<br />
26GB<br />
12<br />
8<br />
16<br />
20<br />
-<br />
-<br />
28GB 4 24 -<br />
32GB4 - 32 -<br />
36GB4 - 28 4<br />
40GB4 - 24 8<br />
44GB4 - 20 12<br />
48GB4 - 16 16<br />
52GB 4<br />
- 12 20<br />
56GB 4<br />
60GB<br />
- 8 24<br />
4 64GB<br />
- 4 28<br />
4 Numbering of RDIMM sockets on memory card<br />
back of<br />
1 2 3 4 5 6 7 8<br />
port 1: RDIMM 1-8<br />
front of planar<br />
9 10 11 12 13 14 15 16<br />
port 2: RDIMM 9-16<br />
- - 32<br />
Bank 1: sockets 1, 3<br />
This table does not represent all possible memory configurations. Memory modules may<br />
Bank 2: sockets 9, 11<br />
Bank 3: sockets 5, 7<br />
Bank 4: sockets 13, 15<br />
vary in price per MB. Selection of smaller RDIMMs may provide a more cost-effective<br />
alternative to using larger RDIMMs. RDIMMs must be added in sets of two to support<br />
interleaving technology.<br />
Bank 5: sockets 2, 4<br />
1. Network operating systems may limit the maximum amount of addressable memory. See<br />
Bank 6: sockets 10, 12<br />
operating system specifications for further information.<br />
Bank 7: sockets 6, 8<br />
2. To obtain the quantity of memory identified in the “Total System Memory” column, select<br />
the appropriate row and order the quantity of RDIMMs identified in all columns for that row,<br />
which will be added to the standard memory noted at the top of the left column.<br />
3. Optional SMP Expansion Module for Base Models (P/N 02R1870) in Xeon MP models is<br />
required if total RDIMMs exceed 16.<br />
4. Requires removal of standard RDIMMs.<br />
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.<br />
131<br />
<strong>IBM</strong> xSeries 445