IBM IntelliStation - ps-2

180
SCSI ID Form Factor Height Front Access Usage
0 ... 6 HS SL Yes open
8 ... 14 HS SL Yes open
EXP300 Storage Expansion Unit 35311RU
SCSI Connectors
Hot-swap Power Supplies with
Integrated Fan
• Fourteen slim-high drive bays.
• Supports Ultra160 SCSI data transfer speeds - up to 160MB/s.
• Single or dual SCSI bus configurations.
• Dual hot-swap 500W redundant power supplies with integrated
fan assemblies.
• Height is 3U (1U=1.75in or 44.45mm).
• Tower capability through optional Rack-to-Tower Conversion Kit.
1
EXP300
2 x 0.8mm VHDCI
Connectors
35311RU
Selectable Bus Configuration
2 x 7 bays
1 x 14 2 bays
Ultra2 and/or Ultra160 HDDs 3
SCSI IDs 0 ... 6
SCSI IDs 8 ... 14
1. Housed in a 19in rack mountable drawer and ships
standard with redundant 500W hot-swap power supplies,
two power cords and a single 2M Ultra2 SCSI cable capable
of supporting Ultra160 speeds.
2. Twintailing reduces the maximum number of HDDs on a
single bus to 13.
3. When combined with a ServeRAID-4x controller, Ultra2
and Ultra160 HDDs may be mixed on the same bus and
operate at up to their maximum respective speeds.
Requires IBM NetBAY 42 Enterprise Rack or Expansion
Cabinet (930842S, E), NetBAY 42 Standard Rack Cabinet or
Expansion Cabinet (9306420, 1), NetBAY 25 (9306250),
NetBAY 11 (9306110) or Rack-to-Tower Conversion Kit
(09N7296).
External Storage Expansion Units require storage
controllers and external cables. Select a supported RAID
controller from the system configurator and cables from
Appendix D: Cables - Storage Units - Controllers.
Cables and Controllers:
See Appendix D: Cables - Storage Units - Controllers