IBM IntelliStation - ps-2

166
Option Part Number
8678-21X
27-
Jun
Withdrawal Date 13
2 1
Processor Speed (GHz)
Number of Processors (Std/Max)
L2 ECC Cache (KB)
Memory (Std/Max) 3
IDE Storage Controller
BladeCenter HS20
IDE HDD Bays (Total/Avail) 4
Onboard Ethernet (Mbps) 6
Internal IDE HDD Capacity (Std/Max) 5
BladeCenter HS20 At-A-Glance
Integrated System Management Processor 7
Video Controller / Memory
SCSI Storage Expansion Unit (Std/Max) 8
1/2 512 512MB/4GB Dual ATA-100 2/2 0/80GB 2 x 10/100/1000 Y ATI Rage XL/ 8MB 0/1 U320 2/2 0/293.6GB 0/1 48P7066
-
8678-41X 2.4 1
1/2 512 512MB/4GB Dual ATA-100 2/2 0/80GB 2 x 10/100/1000 Y ATI Rage XL/ 8MB 0/1 U320 2/2 0/293.6GB 0/1 48P7066
-
8678-51X 2.61 1/2 512 512MB/4GB Dual ATA-100 2/2 0/80GB 2 x 10/100/1000 Y ATI Rage XL/ 8MB 0/1 U320 2/2 0/293.6GB 0/1 48P7066
-
8678-61X 2.8 1
1/2 512 512MB/4GB Dual ATA-100 2/2 0/80GB 2 x 10/100/1000 Y ATI Rage XL/ 8MB 0/1 U320 2/2 0/293.6GB 0/1 48P7066
-
8832-21X 2.8 2
1/2 512 512MB/4GB Dual ATA-100 2/2 0/80GB 2 x 10/100/1000 Y ATI Rage XL/ 8MB 0/1 U320 2/2 0/293.6GB 0/1 71P8833
1. Intel Xeon processor with advanced transfer L2 cache and 400MHz (quad-pumped) Front-side Bus (FSB).
2. Intel Xeon processor with advanced transfer L2 cache and 533MHz (quad-pumped) FSB.
3. Two 256MB RDIMMs are standard, supporting two-way interleaving and Chipkill technology. The system architecture supports up to 4GB total memory using 1GB RDIMMs.
4. When two IDE HDDs are installed in machine type 8832 models, IDE HDD mirroring can be enabled.
5. Maximum IDE HDD storage capacity based on two 40GB 5400rpm IDE HDDs. Space for only one IDE HDD is available if an expansion card is installed.
6. Broadcom 5703 dual integrated copper gigabit Ethernet controller.
7. System management functionality, interconnect network connectivity and console connectivity are managed through the standard management module. The standard integrated service processor monitors HS20 system
management activity, communicating with the management module in the BladeCenter.
8. Optional HS20 SCSI Storage Expansion Unit (P/N 48P7058) provides an integrated single-channel Ultra320 storage controller and two hot-swap SCSI HDD bays. The expansion unit installs onto the HS20 by connecting the
SCSI connector, then installing both units together into the BladeCenter. The storage expansion module is the same size as the HS20. The integrated controller supports both Ultra160 and Ultra320 HDDs, but the entire SCSI
bus will default to the slower rate (MB/second) if HDDs of different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroring.
9. Two hot-swap SCSI HDD bays and an integrated Ultra320 single-channel storage controller are provided in the HS20 SCSI Storage Expansion Unit.
10. Maximum capacity requires installing two 146.8GB SCSI HDDs. Mixing of Ultra320 and Ultra160 HDDs is supported, but the bus will operate at the speed of the lowest rated HDD.
11. HS20 Fibre Channel Expansion Card (P/N 48P7061) installs over IDE connector two attaching into the expansion card connector, preventing installation of a second IDE HDD. The expansion card includes two Fibre
Channel channels and two ports. One channel connects the HS20 to one optional BladeCenter 2-port Fibre Channel Switch Module (P/N 48P7062) installed in switch module bay three. The second channel connects to a
second optional Fibre Channel switch module in bay four, which provides a redundant environment. Ethernet and serial I/O expansion cards are planned for future release. Expansion card selections cannot be mixed within a
single BladeCenter chassis because they must connect to switch modules installed in switch module bays three and four.
12. IBM offers configure-to-order (CTO) capability for selected products through Easy Access. Although similar to machine type models (MTM), CTO systems utilize different part numbers called Sales Building Blocks (SBB).
The contents of an option may not entirely correspond to an SBB because only a certain component within an option package may be required to configure a specific system. Additional or different configuration rules or
limitations may apply to the SBB. When a difference occurs, the rules will be documented in the tables, diagrams or footnotes.
13. Not available from IBM after this date. Business Partner inventory may be availabe.
SCSI Interface 9
SCSI HDD Capacity (Std/Max) 10
SCSI HDD Bays (Total/Avail) 9
SBB Number (Easy Access only) 12
Expansion Cards (Std/Max) 11