IBM IntelliStation - ps-2

120
Part
Number
Description
Adapter
Length
PCI
Support1 Slots
Supported1 Hot-
Plug2 Storage Controllers
PCI Voltage
Key
MHz
3
37L6889 ServeRAID-4H Ultra160 SCSI Controller4 Full 64-bit 1 ... 6 X Universal 33
06P5736 ServeRAID-4Mx Ultra160 SCSI Controller 5 Full 64-bit 1 ... 6 X Universal 66
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller 6
Half 64-bit 1 ... 6 X Universal 66
19K4646 PCI Wide Ultra160 SCSI Adapter 7 Half 32-bit 1 ... 6 - Universal 66
Fibre Storage Controllers and Options 8
00N6881 FAStT Host Adapter Half 64-bit 1 ... 6 X Universal 66
24P0960 FC2-133 Host Bus Adapter Half 64-bit 1 ... 6 X Universal 133
174290U FAStT900 Storage Server (US line cord) - - - - - -
17421RU FAStT700 Fibre Channel Storage Server - - - - - -
172260U FAStT600 Storage Server (US line cord, English pubs) - - - - - -
35421RU FAStT200 Storage Server - - - - - -
35422RU FAStT200 HA Storage Server - - - - - -
3534F08 TotalStorage SAN Switch F08, 8-port - - - - - -
2109F16 SAN Fibre Channel Switch, 16-Port
Networking
- - - - - -
9
Ethernet 10
06P3601 10/100 Ethernet Server Adapter 11
Half 32-bit 1 ... 6 X Universal 33
22P4901 10/100 Dual Port Server Adapter 11 Half 64-bit 1 ... 6 X Universal 66
22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1 ... 6 X Universal 133
31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 11
Half 64-bit 1 ... 6 X Universal 133
31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) 11 Token Ring
Half 64-bit 1 ... 6 X Universal 133
34L5001 16/4 Token-Ring PCI Management Adapter11 Half 32-bit 1 ... 6 X Universal 33
34L5201
High-Speed 100/16/4 Token-Ring PCI Management
Adapter 11 System Management
Half 32-bit 1 ... 6 X Universal 33
12
03K9309 Advanced System Management Interconnect Cable Kit13 Remote I/O Expansion
- - - - - -
8684-1RX
14, 15
RXE-100 Remote Expansion Enclosure - - - - - -
Note: xSeries 440 supports the IXA Adapter (P/N 1519100) for connection of two-, four- and eight-way systems to iSeries models for Microsoft Windows 2000 Server and Advanced Server.
The adapter must be installed in PCI slot two only.
1. Adapters rated at a lower frequency than the slots in which they are installed will reduce the bus to the frequency of the slowest adapter. 133MHz PCI-X adapters are backward compatible
with 33/66MHz, 64-bit PCI-based servers.
2. All six slots are full-length hot-plug capable. For network operating system support, access www.pc.ibm.com/us/compat.
3. xSeries 440 includes an integrated dual channel Ultra160 SCSI controller with one external and one internal connector. See Internal SCSI Cabling or Internal Cabling Overview for cabling
alternatives. When a RAID controller is installed as a boot disk, it must be installed in a slot that is scanned before other RAID controllers in the configuration. Refer to the scan sequence
provided in this section.
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache. The two internal connectors are not
accessible due to a cabling interference. Four external Ultra160 0.8mm VHDCI connectors are available.
5. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connections (only two connectors may be used). External connectors are 0.8mm VHDCI. HDD errors may occur if the backplane is attached to this controller when installed in slot
one unless an optional cable with additional insulation is installed (FRU #02R0715).
6. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either one internal or one
external Ultra160 connection. External connector is 0.8mm VHDCI. HDD errors may occur if the backplane is attached to this controller when installed in slot one unless an optional cable
with additional insulation is installed (FRU #02R0715).
7. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector, a five-drop multi-mode terminated LVD SCSI cable and one external 0.8mm VHDCI
connector. This system supports external connection only.
8. See Fibre Channel Solutions Overview section for additional configuration information.
9. xSeries 440 has an integrated Broadcom-based 10/100/1000 PCI Ethernet controller (copper). Wake on LAN is supported for the integrated controller (at 10/100Mb only).
10. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant
solutions provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. One of the optional PCI Ethernet adapters listed is
copper and Intel-based (P/N 06P3601) and two are Broadcom-based (22P7801, 31P6301).
11. The Wake on LAN function of this option is supported by this server if the latest firmware is installed.
12. xSeries 440 includes a Remote Supervisor Adapter (RSA) installed in a dedicated PCI slot with an external connector, leaving six PCI slots available for optional adapters. Support for
connection to other servers requires an optional Advanced System Management Interconnect Cable Kit (P/N 03K9309). Direct connection to the RXE drawer management controller in an
RXE-100 Remote Expansion Enclosure is supported through a standard Interconnect Management Cable Kit with 3.5m cable. An 8m optional cable is available. Sixteen-way configurations
provide an Ethernet crossover cable to connect the Ethernet ports in the RSAs in each chassis if they are not connected to an Ethernet LAN. All system management functionality supported
by the RSA is provided for both the primary and secondary servers through the Ethernet connection on the RSA. The RS485 port is only required when the 16-way x440 configuration is
interconnected to support additional systems with the x440 standard RSA serving as a focal point for those systems.
13. Required to connect the standard Remote Supervisor Adapter to an interconnect network with other servers for system management support through a single LAN or modem connection.
Up to 24 Integrated System Management Processors or Remote Supervisors Adapters may be interconnected with an aggregate connection length of no more than 91.4m (300ft). This
interconnect network of 24 devices may also include a maximum of 12 Advanced System Management Processors or Advanced System Management PCI Adapters. A customer-supplied
Cat5 cable is required for each interconnection. System management RS485 interconnect network connections for sixteen-way configurations are not required unless the RSA in the 16-way
x440 configuration is a focal point for additional systems.
14. RXE-100 Remote Expansion Enclosure supports up to 12 additional PCI-X slots. Cable required for connection included with expansion unit, which attaches to a standard integrated RIO
port located on the back of the x440 chassis. An optional longer cable is available. Refer to RXE-100 section for diagrams and supported options.
15. xSeries 440 supports only one RXE-100 for all server configurations. Two- and four-way systems use only RIO port A because port B is inactive unless a second SMP Expansion Module
is installed. Only one RIO connection to the RXE-100 is supported for both four- and eight-way systems. Sixteen-way systems require a connection from each server and an interconnection
between the servers.