IBM IntelliStation - ps-2

56
Part
Number
Description RPM Height
Bays
Supported 1
Maximum
Quantity 2
06P5754
Hot-Swap Ultra160 HDDs
18.2GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 10000 SL 1 ... 6 9
06P5755 36.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 10000 SL 1 ... 6 9
06P5756 73.4GB 10Krpm Ultra160 SCSI Hot-swap SL HDD 10000 SL 1 ... 6 9
06P5767 18.2GB 15Krpm Ultra160 SCSI Hot-swap SL HDD 15000 SL 1 ... 6 9
06P5768 36.4GB 15Krpm Ultra160 SCSI Hot-swap SL HDD
Hot-Swap Ultra320 HDDs
15000 SL 1 ... 6 9
32P0726 36.4GB 10Krpm Ultra320 SCSI Hot-swap HDD 10000 SL 1 ... 6 9
32P0727 73.4GB 10Krpm Ultra320 SCSI Hot-swap HDD 10000 SL 1 ... 6 9
32P0728 146.8GB 10Krpm Ultra320 SCSI Hot-swap HDD 10000 SL 1 ... 6 9
06P5776 36.4GB 15Krpm Ultra320 SCSI Hot-swap SL HDD 15000 SL 1 ... 6 9
32P0734 36.4GB 15Krpm Ultra320 SCSI Hot-swap HDD 15000 SL 1 ... 6 9
32P0735 73.4GB 15Krpm Ultra320 SCSI Hot-swap HDD
Associated Options
15000 SL 1 ... 6 9
33P2751 Ultra320 3-Pack Kit 3
- - A+B 1
32P8164 External SCSI Interface Kit4 - - - 1
24P7973 Ultra320 External SCSI Connector Cable Option4 - - - 1
Optical Devices
Bays
Supported
22P6950 16X Max RAM-Read DVD-ROM Drive5, 6 A, B, C
22P6970
5, 6
Multi-Burner A, B, C
External Storage Expansion Units 7
Form Factor
35311RU EXP300 Storage Expansion Unit8 Rack (3U)
09N7296 EXP300 Rack-to-Tower Conversion Kit -
17401RU FAStT EXP700 Storage Expansion Unit9 Rack (3U)
172260U FAStT600 Storage Server (US line cord, English pubs) 10
Rack (3U)
35601RU FAStT EXP500 Storage Expansion Unit 11
Rack (3U)
35421RU FAStT200 Storage Server12, 13 Rack (3U)
35422RU FAStT200 HA Storage Server12 Rack (3U)
19K1121 FAStT200 Redundant RAID Controller -
1. Install HDDs in the order indicated in the system bay diagram (from bottom of chassis). If an Ultra320 3-pack Kit is installed, install HDDs from bottom to top.
2. Maximum quantity of HDDs can be increased to nine by converting the two removable media bays to three SL HDD bays using the 3-Pack Ultra320 3-Pack Kit (P/N 33P2751). When
integrated mirroring is enabled, the maximum quantity of HDDs supported on the standard backplane is three (two mirrored and one hot-spare).
3. Removable media bays A and B can be converted to three SL hot-swap bays using the optional Ultra320 3-Pack Kit (P/N 33P2751). The hot-swap backplane is cabled as an independent
bus. All HDDs installed in the bus must be Ultra320 in order for the bus to operate at Ultra320. If one or more HDDs installed are Ultra160, the entire bus will operate at Ultra160 speeds.
4. Required to enable a 0.8mm VHDCI external connector for external SCSI attachment to the second channel of the integrated controller. Refer to Appendix D: Cables - Storage Units -
Controllers for additional information.
5. Either replace standard CD-ROM or install in one of the media bays. A two-drop IDE cable is included with the optional optical drive. If installing as an additional device, connect the cable
to each optical device and the IDE connector on the system board. Configure the optional device as a master using the preset configuration if replacing the standard device or as a slave if
installed as an additional device.
6. Audio and video are not supported for DVD-ROM drives. The drive reads data signals only.
7. To configure a SCSI storage device, select an optional SCSI controller then refer to Appendix D: Cables - Storage Units - Controllers to confirm the controller supports the desired External
Storage Expansion Unit and to select a supported cable. For HDD or other expansion unit options, see the specific expansion unit section. For Fibre Channel storage devices, refer to the
Fibre Channel Solutions Overview section.
8. EXP300 includes a single 2m Ultra2 SCSI cable and dual hot-swap 500w redundant power supplies, each with its own power cord. To convert an EXP300 to a tower form factor, EXP300
Rack-to-Tower Conversion Kit (P/N 09N7296) is required. In order to attach EXP300 to the integrated controller when ServeRAID-5i is installed, External SCSI Interface Kit (P/N 32P8164) is
required to enable a 0.8mm VHDCI external connector on the system chassis.
9. FAStT EXP700 Storage Expansion Unit (P/N 17401RU) includes dual hot-swap 400w power supplies, each with its own power cord.
10. FAStT600 Storage Server includes two 390w auto-ranging redundant power supplies, each with its own power cord.
11. FAStT EXP500 Storage Expansion Unit (P/N 35601RU) includes dual hot-swap 350w power supplies, each with its own power cord.
12. The FAStT200 includes two hot-swap, 350w auto-ranging redundant power supplies, each with its own power cord.
13. Can be upgraded to FAStT200 HA Storage Server through the addition of a FAStT200 Redundant RAID Controller (P/N 19K1121).