IBM IntelliStation - ps-2

148
xSeries 450 Power, Monitors & Accessories
Part
Description
Number
Power1 Monitors2 633147N E54 Color Monitor 15in (350mm, 13.8in viewable image), stealth black3 63324HN E74 Color Monitor 17in (406mm, 16in viewable image), stealth black3 66274AN G78 Color Monitor 17in (406mm, 16in viewable image), stealth black3 32P1031 NetBAY 1U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 4
32P1032 NetBAY 1U Flat Panel Monitor Console Kit (without keyboard) 4
32P1702 NetBAY 2U Flat Panel Monitor Console Kit (with US Space Saver keyboard) 4
32P1703 NetBAY 2U Flat Panel Monitor Console Kit (without keyboard) 4
1. xSeries 450 systems include two 1050w hot-swap power supplies with two 2.8m/9ft IEC 320-C13 to IEC 320-C14 power cables
for intrarack power distribution. Models shipped in the US also include two 2.8m/9ft IEC 320-C13 to NEMA 6-15P power cords for
attachment to high voltage power sources. Power supply redundancy is standard for all configurations with a high voltage power
source.
2. xSeries 450 uses an integrated ATI RageXL video controller with 8MB of video memory. Optional video adapters are not
supported.
3. Installation within a rack requires optional Monitor Compartment (P/N 94G7444).
4. Includes a 15in Flat Panel Monitor.
Part
Description
Number
Rack and NetBAY1 Refer to the Rack Cabinets and Options section for information concerning IBM racks and rack-supported
devices.
Console Connectivity2 1735L04 NetBAY Local Console Manager
1735R16 NetBAY Remote Console Manager
73P5832 USB Conversion Option (four-pack) 3
Keyboard and Mouse4 10K3849 106-key Preferred USB Keyboard with 2-port USB Hub (stealth black) 6, 7
1. xSeries 450 is housed in a 19in rack-mountable drawer and requires one of the racks listed in the Rack Cabinets and Options
section.
2. Refer to the Rack Console Options section for information regarding console connectivity using these options.
3. Required to connect one of the USB ports on the server chassis to either a Local or Remote Console Manager
(P/N 1735L04 or 1735R16). The option kit contains four 1.5m KVM cables, four 14in lengths of Cat5 cable, four large curly-lock
cable connectors, and an eight-pack of velcro strips.
4. xSeries 450 supports rack configurations only and ships without a keyboard or mouse. Only USB-capable keyboards and
mice are supported. The system includes three USB ports (one on front of chassis), a serial port and SVGA video port.
5. Advanced TrackPoint IV features are not available on IBM xSeries systems.
6. Installation within a rack requires optional keyboard tray (P/N 28L4707). This keyboard cannot share a keyboard tray with a flat
panel display.
7. USB accessories attach to a single USB-capable server or to either the Local or Remote Console Manager using a USB
Conversion Option (P/N 73P5832).