IBM IntelliStation - ps-2

Updated 07/01/03
09N4300
4Ux20D Tower-to-Rack Kit
59P4817
4U Extended Depth
Tower-to-Rack Conversion Kit
Server System Rack Alternatives
Conversion Kits Standard Racks1 Enterprise
Racks1 59P4211
5Ux24D Tower-to-Rack Kit iII
32P1474
7Ux26D Tower-to-Rack Kit
37L6859
8Ux24D Tower-to-Rack Kit
Servers
xSeries 205 2
X X X X X X X
xSeries 2252 X X X X X X X
xSeries 235 X X X X X X X
xSeries 255 X X X X X X X
xSeries 305 3
X X X X X X
xseries 335 X X X X X X
xSeries 345 4
X X X X X X
xSeries 360 X X X X X X
xSeries 440 X X X X X X
xSeries 445 X X X X X X
xSeries 450 X X X X X X
BladeCenter X X X X X X
1. See the first page of Rack Cabinets and Options section for additional information concerning IBM rack-supported devices.
2. Rack installation requires appropriate conversion kit.
3. Blank filler panels (P/N 94G6670) should be placed on the front of any unused rack space to aid proper airflow through the system units. If non-IBM racks
are used, assure that both the front and rear doors offer a minimum of 45% open area uniformly distributed and in line with the installed servers. A clearance
of at least 51mm (2in) must be maintained between the front door and the system unit’s front bezel. The rear door must maintain the same or greater
clearance. Nonrack installations are not supported.
4. If installed in older IBM racks, the server should not be installed behind a glass door that blocks air flow. Remove the glass door or replace with an optional
perforated door. To order a rack extension kit for withdrawn IBM racks, visit the Options Continuation Program Website at www.pc.ibm.com/ww/ocp.
37L6860
8Ux24D Rack-to-Tower Kit
9306-110
NetBAY11
9306-250
NetBAY25SR
9306-420
NetBAY42SR
9306-421
NetBAY 42SX
9308-42S
NetBAY42ER
9308-42E
NetBAY42EX
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
203
IBM Rack Cabinet