IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
14. Required to connect the standard Remote Supervisor Adapter to an interconnect network with other servers for system management support through a single LAN or modem connection.<br />
Up to 24 Integrated System Management Processors or Remote Supervisor Adapters may be interconnected with an aggregate connection length of no more than 91.4m (300ft). This<br />
interconnect network of 24 devices may include a maximum of 12 Advanced System Management Processors or Advanced System Management PCI Adapters. A customer-supplied Cat5<br />
cable is required for each interconnection.<br />
15. RXE-100 Remote Expansion Enclosure supports up to 12 additional PCI-X slots. Cable required for connection included with expansion unit, which attaches to a standard external<br />
connector located on the back of the x360 chassis. An optional longer cable is available. See section on RXE-100.<br />
16. Not supported in slot one if the RAID adapter is attached to the connector on the planar that controls the hot-swap backplane as a result of a cabling interference with the standard RAID<br />
cable, which must be routed under the adapter. External RAID attachment only is supported for full-length RAID adapters installed in slot one.<br />
17. The hot-plug feature of this adapter is not supported on this system.<br />
18. Slot six is not available if the serial port cable assembly shipped with the system is installed, which provides a nine-pin D-shell serial connector on the rear of the system chassis at the<br />
position of slot six.<br />
Updated 07/01/03<br />
rear view of chassis<br />
RSA: standard Remote Supervisor Adapter<br />
Slot 1: Bus 2, 100MHz, 64-bit, full-length, Active PCI-X, 3.3v (Bus 2 also supports one 133MHz adapter installed in slot 1.)<br />
Slot 2: Bus 2, 100MHz, 64-bit, full-length, Active PCI-X, 3.3v (Slot 2 must be empty to support 133MHz bus 2 frequency.)<br />
Slot 3: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v<br />
Slot 4: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v<br />
Slot 5: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v<br />
Slot 6: Bus 1, 66MHz, 64-bit, full-length, Active PCI-X, 3.3v<br />
Scan sequence:<br />
Inside the server: slots 3, 4, 5, 6, 1, 2<br />
Continuing in an RXE-100: slots 11, 12, 9, 10, 7, 8, 17, 18, 15, 16, 13, 14.<br />
RSA<br />
slot 1<br />
slot 2<br />
slot 3<br />
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.<br />
slot 4<br />
slot 5<br />
slot 6<br />
109<br />
<strong>IBM</strong> xSeries 360
Change language