IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
IBM IntelliStation - ps-2
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
34<br />
xSeries 205 Memory<br />
Part<br />
Number<br />
Memory Description<br />
10K0067 256MB PC2100 CL2.5 ECC DDR SDRAM UDIMM<br />
10K0069 512MB PC2100 CL2.5 ECC DDR SDRAM UDIMM<br />
10K0071 1GB PC2100 CL2.5 ECC DDR SDRAM UDIMM<br />
Total<br />
System<br />
Memory1 1 x 256MB<br />
standard<br />
Quantity of UDIMMs Added<br />
256MB<br />
(10K0067)<br />
512MB<br />
(10K0069)<br />
1GB<br />
(10K0071)<br />
512MB 1 - -<br />
768MB - 1 -<br />
1GB 2<br />
- 2 -<br />
1.25GB - - 1<br />
1.5GB 2 - 1 1<br />
2GB2 - - 2<br />
This table does not represent all possible memory configurations. Memory<br />
modules may vary in price per MB. Selection of smaller UDIMMs may provide a<br />
more cost-effective alternative to using larger UDIMMs.<br />
1. Select the desired total memory, then add the selection in that row to the<br />
standard memory.<br />
2. Requires removal of standard UDIMM.<br />
Location of UDIMM sockets on planar<br />
UDIMM 1<br />
UDIMM 1<br />
xSeries 205 Internal SCSI Cabling<br />
EIDE Configurations<br />
xSeries 205 EIDE models include two two-drop IDE cables. One cable is used to attach to the standard CD-ROM drive. The other attaches to the standard 40GB<br />
IDE HDD. Two additional IDE devices may be installed (up to two IDE HDDs or one optical drive and an IDE HDD).<br />
SCSI Configurations<br />
xSeries 205 supports both nonhot-swap and hot-swap SCSI configurations. Both hot-swap and nonhot-swap models include a standard integrated single-channel<br />
Ultra160 SCSI controller and a two-drop IDE cable for connection to the standard CD-ROM drive and one other IDE optical drive (optional). Nonhot-swap models<br />
include a five-drop 16-bit LVD terminated SCSI cable for connection of SCSI HDDs and an optional SCSI tape drive. Hot-swap models include a nonterminated<br />
SCSI cable for connecting the integrated controller to the hot-swap backplane. Support for tape drives on the same SCSI bus as the hot-swap backplane is not<br />
provided. If the optional ServeRAID-4Mx or -4Lx controller is installed, the standard cable is used to connect the HDDs in nonhot-swap models or the backplane in<br />
hot-swap models to the RAID controller. Tape drives are then connected to the integrated controller using the terminated SCSI cable provided with the optional<br />
tape drive. External SCSI connections require a supported SCSI controller.<br />
For additional information regarding internal cabling, refer to Appendix F: Internal Cabling Overview.<br />
CPU
Change language