IBM IntelliStation - ps-2

32
Part
Number
Tape Drives
IntelliStation Z Pro 6221 Tape Options
Bays
Supported
SCSI
Interface
(bit)
Form Factor Termination
Included
Ext Tape
Enclosures 2
48P7042 20/40GB TR7 Internal IDE Tape Drive1 1 -
89mm (3.5in) SL or
133mm (5.25in) HH
- -
00N7991 20/40GB DDS/4 4mm Internal Tape Drive 2 16 Ultra2 LVD
89mm (3.5in) HH or
133mm (5.25in) HH
Y 3
3510020 4
External Tape Enclosures
3510020 External Half-High SCSI Storage Enclosure 5
Associated Options
- 16 LVD Desktop N -
00N7956
68-pin External Multimode LVD/SE SCSI
Terminator
- 16 LVD/SE Ext Y 3510020
24P7929
Note:
Enabling Cable for External Ultra320 SCSI Port - 16 LVD Int N -
All models include an integrated Ultra320 SCSI controller. SCSI models include a three-drop multimode terminated LVD SCSI cable. IDE models include two two-drop IDE cables. To enable
external attachment to channel B of the integrated SCSI controller, optional Enabling Cable for External Ultra320 SCSI Port (P/N 24P7929) is required, which provides a 68-pin HD external
connector. All SCSI tape drives and external tape enclosures are supported by PCI Wide Ultra160 SCSI Adapter (P/N 19K4646), which includes a five-drop multimode terminated LVD SCSI
cable and an external 0.8mm VHDCI connector, or Single Channel Ultra320 SCSI Controller (P/N 71P8594), which provides a single channel with one 68-pin internal connector, a four-drop
cable and one external 0.8mm VHDCI connector. SCSI tape drives installed internally can be connected to channel A of the integrated controller using the cable that ships with the tape drive
if the HDDs or hot-swap backplane are attached to ServeRAID-4Lx.
1. SCSI models include a two-drop IDE cable for attachment to the CD-ROM and an IDE tape drive. IDE models include two two-drop IDE cables.
2. To determine external cable requirements, note the tape drive's SCSI interface, the appropriate SCSI controller from the system configurator section and the desired enclosure, then refer to
Appendix D: Cables - Storage Units - Controllers.
3. Termination requires installing the 34in single-drop, terminated LVD SCSI cable provided with the option.
4. Requires 68-pin External Multimode LVD/SE SCSI Terminator (P/N 00N7956).
5. Black desktop tape enclosure that supports a single 133mm (5.25in) half-high (HH) tape drive. Internal and external connectors are 68-pin high-density supporting LVD. Requires 68-pin
External Multimode LVD/SE SCSI Terminator (P/N 00N7956). External cables are not included. Refer to Appendix D: Cables - Storage Units - Controllers to select a supported cable.
Note: Additional tape attributes can be found in Appendix A: Tape Drive Attributes.