IBM IntelliStation - ps-2

Part
Number
Updated 07/01/03
Description
xSeries 335 I/O Options
Adapter
Length
PCI
Support 3
Slots
Supported 3
Hot-
Plug
PCI
Voltage
Key
37L6889
Storage Controllers1, 2
ServeRAID-4H Ultra160 SCSI Controller 4
Full 64-bit 2 - Universal 33
06P5736 ServeRAID-4Mx Ultra160 SCSI Controller 5
Full 64-bit 2 - Universal 66
06P5740 ServeRAID-4Lx Ultra160 SCSI Controller6 Half 64-bit 2 - Universal 66
71P8592 ATA133 RAID Controller 7
Half 32-bit 1, 2 - Universal 33
19K4646 PCI Wide Ultra160 SCSI Adapter8 Half 32-bit 1, 2 - Universal 33
71P8594 Single Channel Ultra320 SCSI Controller 9
Fibre Storage Controllers and Options
Half 64-bit 1, 2 - Universal 133
10
00N6881 FAStT Host Adapter Half 64-bit 1, 2 - Universal 66
24P0960 FC2-133 Host Bus Adapter Half 64-bit 1, 2 - Universal 133
17421RU FAStT700 Fibre Channel Storage Server - - - - - -
35421RU FAStT200 Storage Server - - - - - -
35422RU FAStT200 HA Storage Server - - - - - -
3534F08 TotalStorage SAN Switch F08, 8-port - - - - - -
2109F16 SAN Fibre Channel Switch, 16-Port
Networking
- - - - - -
11
Ethernet 12
06P3601 10/100 Ethernet Server Adapter 13
Half 32-bit 1, 2 - Universal 33
22P4901 10/100 Dual Port Server Adapter 13
Half 64-bit 1, 2 - Universal 66
22P6801
PRO/1000XT Server Adapter by Intel (copper) w/CD,
manuals13 Half 64-bit 1, 2 - Universal 133
22P7801 NetXtreme 1000 SX Fiber Ethernet Adapter Half 64-bit 1, 2 - Universal 133
31P6301 NetXtreme 1000 T Ethernet Adapter (copper) 13
Half 64-bit 1, 2 - Universal 133
31P6401 NetXtreme 1000 T Dual Port Ethernet Adapter (copper) 13 Token Ring
Half 64-bit 1, 2 - Universal 133
34L5001 16/4 Token-Ring PCI Management Adapter13 Half 32-bit 1, 2 - Universal 33
34L5201
High-speed 100/16/4 Token-Ring PCI Management
Adapter
Communications14 System Management 15
09N7585 Remote Supervisor Adapter 16
For the latest product & technical information, refer to the Information Sources on pages 2 & 3.
MHz
Half 32-bit 1, 2 - Universal 33
Half 32-bit 1 - Universal 33
1. xSeries 335 has a single-channel, Ultra320 integrated controller that supports both Ultra160 and Ultra320 HDDs. The entire SCSI bus will default to the slower rate (MB/second) if HDDs of
different technologies are mixed on the same bus. The LSI chipset allows for two HDDs to be allocated for mirroring if a RAID adapter is not installed.
2. If a RAID controller is installed in either slot one or two, the boot media must be attached to it. If two RAID controllers are installed, the boot media must be attached to the controller in slot
one. If two non-RAID storage controllers are installed, the BIOS for the integrated storage controller must be disabled, i.e., it cannot support either external or internal storage media.
3. A 64-bit adapter installed into a 32-bit slot will transfer data at 32-bit rates. Adapters rated at 66MHz will operate at 33MHz when installed in a 33MHz slot. 33MHz adapters will reduce
66MHz buses to 33MHz. 133MHz PCI-X adapters are backward compatible with 33/66MHz, 64-bit PCI-based servers.
4. ServeRAID-4H Ultra160 SCSI Controller is powered by a 266MHz PowerPC 750 processor and provides 128MB of battery-backed ECC cache The internal connectors are not accessible
due to a cabling interference. Four external Ultra160 0.8mm VHDCI connectors are available.
5. ServeRAID-4Mx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor that provides 64MB of battery-backed ECC cache and two internal and two external
Ultra160 connections (only two connectors may be used). External connections are 0.8mm VHDCI.
6. ServeRAID-4Lx Ultra160 SCSI Controller is powered by a 100MHz Intel Zion GC80303 processor and provides a single channel, 32MB of ECC cache and either one internal or one external
Ultra160 connection. External connector is 0.8mm VHDCI.
7. ATA133 RAID Controller (P/N 71P8592) supports RAID levels 0 and 1 on up to two ATA66, 100 or 133 EIDE HDDs. The dual channel IDE controller includes two internal 40-pin connectors,
two 18-inch single-drop IDE cables (P/N 02R0719) and two 23-inch two-drop IDE cables (P/N 02R0721).
8. PCI Wide Ultra160 SCSI Adapter (P/N 19K4646) provides a single channel with one internal connector and one external 0.8mm VHDCI connector. Support for external SCSI devices only. A
five-drop terminated LVD SCSI cable is included but not supported for use in this server.
9. Single Channel Ultra320 SCSI Controller (P/N 71P8594) provides a single channel with one 68-pin internal connector, a four-drop multimode terminated LVD SCSI
cable and one external 0.8mm VHDCI connector. Only one of the two connectors may be utilized. Hardware is included in the option to support either low-profile
(2U) or full-size (3U) installations.
10. See the Fibre Channel Solutions Overview section for additional configuration information.
11. xSeries 335 includes dual full-duplex copper 10/100/1000Mbps Broadcom 5703 Ethernet controllers.
12. In a fault-tolerant networking environment, using the fault-tolerant software delivered with the Ethernet adapters of a single manufacturer is recommended. Installing fault-tolerant solutions
provided by multiple manufacturers may cause failures if the intermediate drivers provided with the adapters are not compatible. Two optional Ethernet adapters are copper and Intel-based
(P/N 06P3601, 22P6801). Two adapters are Broadcom-based (22P7801, 31P6301).
13. The Wake on LAN function of this option is supported.
14. xSeries 335 includes four USB ports (two each on both front and rear), a high-speed serial/asynchronous port (NS16550A compatible), one RS-485 port, and in/out C2T Interconnect
connectors.
15. xSeries 335 has one integrated RS-485 system management interconnect port located on the back of the system chassis. Connection of the standard service processor to servers other
than xSeries 335 in an interconnect network requires a customer-supplied Cat5 Ethernet cable. Connection to other xSeries 335 servers can also be achieved through the C2T Interconnect
chaining cables, which transmits both console connectivity and system management functionality.
16. When installed in an xSeries 335, Remote Supervisor Adapter (RSA) shares functionality with the integrated service processor and serves as interface for both. An external Cat5 connection
between RSA and the integrated service processor using the dongle (pigtail cable) and short Cat5 cable supplied with RSA is required in addition to connection of the 20-pin ribbon cable to
the planar if the server is acting as focal point in a system management interconnect network, which indicates it is the first server in a chain of x335 systems. Connection of the external AC
power supply provided with RSA is not required.
87
IBM xSeries 335